Recent content by rickster

  1. R

    NCASE 6900XT Water-Cooling

    All the water blocks i've seen are too big to fit in the case.
  2. R

    Question about GPU Waterblocks for Ncase M1 V6.1

    I complied a list of the water blocks that should fit These are all 3080/3090, I haven't seen any AMD 6xxx cards/blocks that will fit EK reference (220x124x20.5mm) EK zotac (231x124x20.5mm) EK xc3 (275x124x20.5mm) bitspower founders (216x98.2x23.2) watercool reference (230 x 119 x 21 mm)
  3. R

    IceManCooler pump/res combo

    I got the non-combo res, the holes drilled out are completely different sizes (sorry too lazy to get a ruler). The P5 pump is slightly wider than my EK DDC pump. The P5 pump can't fit into the non-combo res. There's also a tiny lip on the combo res.
  4. R

    NCASE M1 V6 GPU Compatibility List

    I think part BP-VGAMDLAC-A2 will hit your fan on the side radiator?
  5. R

    IceManCooler pump/res combo

    Well i got some bad news, the iceman p5 pump reservoir combo does not support DDC pumps. Here are some pictures. The inlet/outlet is a slightly difference size. The EK ddc pump won't fit. The P5 pump is the white one with the red o-ring. I ordered the another one, this time without the pump...
  6. R

    NCASE M1 V6 GPU Compatibility List

    Thanks for checking. here's someone with the EK founders block: Says there's 5mm between the bock and their fans/rad My case just came today, so all i need to do is get the gpu/block. I might wait in line at the microcenter near me. I'm in the unofficial discord and people are saying show...
  7. R

    NCASE M1 V6 info

    The cables in the sf750 are too long, you either have to make or buy custom cables if you want easy cable management.
  8. R

    NCASE M1 V6 GPU Compatibility List

    That's a good point. There's no information to verify but you could be right. Does someone want to contact alphacool for the diagram with dimensions?
  9. R

    NCASE M1 V6 GPU Compatibility List

    I think the 27mm dimension is too thick to have a 15mm fan and the tx240 radiator get enough air flow. this guy has the FE card, which has the inlet/outlet at same location as the alpha cool card: so it confirms you can do a custom loop with the inlet/outlet in that location I think the...
  10. R

    IceManCooler pump/res combo

    Yeah I bought the res with the P5 pump. Well that's going to suck if I have to order another res and wait another month. It's shocking how hard it is to find detailed information on pumps. I've read dozens of posts from the people who built dual loops in the Ncase M1 and i'm still not that...
  11. R

    IceManCooler pump/res combo

    I'm pretty sure any DDC pump would work. Pump pictures don't show the pump taken apart, you'll have to do that to get it to fit in the reservoir. Mine just cleared customs and is in Indiana, I'm located in California. The tracking says it'll get to me by December 10-30th. I bought the cheap...
  12. R

    NCASE M1 V6 info

    I don't know if you're talking about the internals, but the v6 allows for you to remove the front I/O (USB ports and 3.5mm port). @17 seconds he has the front I/O installed. At 1:50 he has the front I/O removed. https://ncases.com/products/m1-front-io-plate-kit
  13. R

    NCASE M1 V6 GPU Compatibility List

    when did you place your order for the case? and what shipping option did you choose?
  14. R

    Log Newbie, or not to be - A FormD T1 Watercooled Build Log

    Hey eedev, to control your pump, did you plug your pump into the quadro or did you plug it into the mobo? What connector do you need to plug it into the quadro?
  15. R

    Motherboard msi B550I Gaming Edge Wifi

    I agree having to buy third party hardware and use their software to avoid bugs is not acceptable. Did you RMA your board, do you know if other people have this issue? There's not much you can do other than that and make a fuss on social media, and never buy from them again.