Recent content by rcradiator

Arctic Freezer 50 TR, with modifications (stripped all plastic from the cooler, gave the top of the heatpipes some concussive therapy to shorten them by 2mm, bent some of the fins on the sides just enough to allow for some fan clips from the Cryorig H7 to clip on with two 120mm fans)

Just wondering, are there plans to offer these cases outside of taobao?

Now you're making me wish I had waited instead of getting a P-ATX v1. Also, technically SLI is supported with this case, right?

A few years ago, I ordered a Ncase M1 v5 with the TG panel for a build with a tower cooler. After a few years, I wanted to get a bit more cooling and tracked down the older C14. However, the C14 doesn't work with a tempered glass panel for obvious reasons. I checked the Ncases website, and while...

It's no longer produced now. The v2 is in production and will probably be available by November or December,

Well, I'll be damned. I already had a hell of a time trying to fit a 1080 Ti Strix inside the v5 before deshrouding it. Congrats for getting it in. Looks like the v6 makes it super easy to get larger gpus in compared to the v5.

I imagine powering that monster is going to be a bigger challenge since the best SFX psu, the SF750, only has four EPS/PCIE plugs and that power hog apparently has a 12 pin adapter that requires 3 8 pin PCIE. That would leave a single 8 pin for EPS. Running something like Threadripper, X299, a...

It sits in the case fine, but I wonder if it's even possible to install without drilling out the rivets and taking the case apart. You need some vertical clearance to install it into the pcie slot, and the FTW3 already takes up all of the vertical clearance. I found installing a 1080 Ti Strix...

Nice build! I'm still waiting for my case to move from New York as USPS is being annoying (f*** Louis DeJoy for slowing down USPS), so all I can do is stare at internet builds and hope that it comes soon. Speaking of custom cables, does anyone have lengths for custom cables?

Black Ridge and shorter

Are you talking about shipping overseas or in the US? Sliger apparently added free ground shipping in the US. High international shipping costs are expected right now due to increased costs of shipping overseas.

Wow, I'm really impressed with the changes. It almost makes me wish I had waited a bit for v2 (my v1 is still in the mail, looking forward to it). One change/suggestion to the prototype would be to mirror the bottom right fan mounting holes to the top right as well. This would allow mounting a...

Here's something I found a while back. I don't have a C7 (and don't intend on buying one from OutletPC who is jacking up the prices on them) so I wouldn't be able to confirm, but they look very similar to or are the same as these fan clips specifically made for the C7 on Taobao. It would be nice...

IIRC the C7 comes with a set of nuts and washers as an alternative mounting solution to the backplate. Replacing the fan is a problem for anyone without the C7G fan clips, but I suppose zipties would work.