Recent content by nhatminh2h

Here's my temperature and Fan RPM for intake vs exhaust for my 3070FE Haven't redone the experiment since I added new +5mm feet to the case.

Glad to be of help. Good to know the full size 92mm fan makes a difference, that was the only upgrade I was considering in the foreseeable future. Your undervolting seems good, make sure you are still getting the same performance though. I checked mine with Time Spy. Here are a few of my...

Oh nice. I'm running at 1950@893mV VRAM+850. Similarly, it still gets to about 75, the 200 rpm difference is very noticeable tho. I might try to go down to 850mV to see how quiet I can keep it. I think there's only the curve optimiser with PBO2. This is my first build and frequency/voltage...

If I recall correctly, some boards have it and some don't at AGESA 1.1.0.0 but I'd recommend checking out Optimum Tech's video if you haven't yet. I'd also highly recommend trying out undervolting and/or overclocking. Having undervolted my 3600 to 4100@1.056V, I had my first crack at the GPU...

Damn, that's a lot of tests. Congrats on your build. Have you had a chance to try PBO2? Yeah, it seems that setting both case fans as exhaust is still the best. I was considering setting my mobo fan to intake and my CPU fan to exhaust since I have turned the L9i heatsink direction to be...

Also I found this video quite informative. O!Technology explains the heatsink design and airflow pretty well.

Yeah no biggie. Just had some spare time between my exams so I did a quick test to change the direction of the fan under the PSU. Just did a simple stress test with Heaven and recorded the temperature with HWInfo64. Initial impression is that with the PSU fan flipped, the GPU runs about the...

Even though they look different, the Founder 3070 and 3060ti both have the flow-through design, you can see this clearly from the fact that they have no side vents. The difference mainly comes down to the length of the card-the 3080 PSU side fan is directly on top of the fan, whereas the 3070...

Yeah, I'm fairly sure only the L9i can be rotated since it's roughly square(longer side parallel to fins despite Noctua saying 95x95, or maybe I just got an older model). If you want I can still upload it on thingiverse. By the end of this month, I should have some more time to test the...

I didn't really have the chance to do any testing with the cooler in the default orientation because for some reason mine was touching the vrm heatsink(). Since printing custom brackets would solve both that and the air flow problem, I decided to just go for it. Here's an album for my build ()...

Are my temps normal? R5 3600 /w NHL9i At stock, I reach a max of 88-90 C on prime95 and Cinebench, idles around 45 C. After some tuning(CTR did not work well for me, possibly due to limited cooling), CPU runs at 4GHz 1.05V, idles at 38-40 C, Cinebench maxes out at ~72 C(possibly lower if I max...

Just finished my build with a similar setup. As recommended by nearly everyone, I went with both bottom fans as exhaust and CPU fan as intake