Recent content by Necere

I don't have that information, unfortunately.

Depends on how much room the power connector has, but otherwise the reference AMD 7900 looks like it should (just) fit.

Link

You either need very low power parts or a LOT of surface area and widely-spaced fins for a truly fanless build. Check out MonsterLabo for what that looks like. 1U heatsinks like the Dynatron are designed to work with high CFM fans in a 1U rackmount case. If you take a look at the datasheet it...

How are you planning to cool the CPU? That's what'll most likely drive the height, not the USB ports.

Afterkmarket PC phase change cooling was a thing in the early 2000s (e.g. Asetek Vapochill and Prometiea) among overclocking enthusiasts. It was the only way to get sub-ambient (or even sub-zero) temperatures. They weren't that practical though, as they were bulky and used a bunch of electricy...

Hey no worries. I accept your apology and I appreciate your humility. It's good to get the story out there for people regardless.

Please don't impute intent without knowing the full picture. There were circumstances leading up to the cessation of production that I could not disclose at the time. I wrote the original notice (which W360 later edited to sound more positive with an eye to his planned replacement) and I felt an...

The M1 is no longer available and will not be restockedd, unfortunately.

We've made the decision not to order any new M1 production, so there won't be any restock, unfortunately.

@Gilles3000 is correct, having both the hot side and cold side of the TEC in the same loop is counterproductive. The problem is you're limited by the thermal transfer rate of the water blocks (as well as the radiator). The water is moving through the blocks so quickly that the temperature...

Yes, should be fine.

Won't be this month, unfortunately. The next production run will be later than I originally expected, probably not until November.

The image is a holdover from a previous version of the site that PlayfulPhoenix designed for us. I've removed it so it doesn't confuse anyone else.

If the LED comes on during boot then it's likely a BIOS setting turning it off. Look for LED settings in the BIOS and make sure stealth mode or a similar setting isn't enabled.