Recent content by Neathdrawls

Congratulations on getting on the tech news! This is indeed a very interesting mod.

Very little updates from me (or rather, an further explaination of my earlier cinebench run). other than changing a cooler, and now waiting for another IS-55 to come, and then getting my wifi card into the board. On that note, Thermalright's AXP90 series don't fit with the board. It comes in...

I guess one could technically fit full 60x25mm fan for the GPU (very tight fit), but in my case, it doesn't make sense, as it just interferes with my RX 6400 fan. If using some like Robee's A2000 deshroud mod, it would be just nice I reckon. As for the front three fans, I think 8015mm would...

The board doesn't have sensors for the VRMs actually. HWinfo can't seem to find them if any, or I might be blind. Would probably check it again. If anything, as this board is a cut down version of Maxsun's H610I, it wasn't reviewed terribably actually by users in China. Edit: Actually there...

Once again, thanks for this beauty of a case, @REVOCCASES !

Did some tests over the weekend. Cinebench R23 Scores: 16982 Temperatures for 4 P-Cores were in the 90C to 100C during the run. P-Cores all cores were at 3.7 GHz, while E-Cores were at 2.8 GHz. The board was able to sustain PL1 at default 95W throughout the whole Cinebench run.

Alright, just some preliminary answers first. No tests yet. No performance results. Put in another M.2 and heatsink, to just make it look silly good how the m.2 heatsinks are as tall as the CPU cooler (ID Cooling IS-47-XT) BIOS is rudimentary, compared to your other big 4 board...

Hahahah, shhhhhh. 12700H. Although at the back of the box, it stated there's a 12900H variant too. Somewhere out there. Did a quick test to see if it posts, and to build it in a case would be my Easter weekend activity!

Guess what came in the mail for me today.

ITXLab Koukou has a new video out for the N-ATX. https://www.bilibili.com/video/BV13V4y1Q7Qq/?spm_id_from=333.1007.tianma.1-1-1.click&vd_source=2948d38d46f97ec1638a925b87c8e3e3 Am about to watch it, will edit in comments after. Edit: Ah, it's the v1, not the v2 though. A friend of Koukou's...

According to my own research, these are the 4090 that should fit with an ATX Board are: Founder's Edition 4090 MSI 4090 Ventus PNY 4090 VERTO (not the XLR8) PNY 4090 Gaming Uprising / Manli 4090 Gallardo (One of the more unique looking ones) Inno3D 4090 3X AX Gaming 4090 Renegade 3X...

Around 250W to 290W. Granted I have undervolted the GPU too, around 2700Mhz @ 950mV.

Finally getting around to this post. Upgraded to a 4090, after a small scare with my RX 6800 XT, where I thought it died for a while. Actually, I also had to RMA the first 4090, as it suddenly died. No burnt pins on either the GPU side or the cable side, but thankfully the RMA with the local...

Ok, supposedly last update/upgrade of my N-ATX v2. Now with ATX 3.0 PSU, the FSP Hydro G Pro 1000W. Compact enough at 150mm in depth, still feels like it's almost the right size to fill it up. Of corurse, custom cables for it is essentially cheating, as I don't think the stock, normal flat...

Once again, thanks for the advice and info!