Recent content by Maniac

  1. Maniac

    Prototype SLATE AIR & AQ, (15.4L and 19.9L) >>HUGE CHANGES<< modular cooling, Looking for Feedback!

    I would not have any issues with "made-to-order", but please keep in mind there are some of us who live abroad (Europe for example). So shipping & customs will increase the total cost by a lot. ;)
  2. Maniac

    Prototype SLATE AIR & AQ, (15.4L and 19.9L) >>HUGE CHANGES<< modular cooling, Looking for Feedback!

    Why? The case will support both sizes the way it is now... https://smallformfactor.net/forum/proxy.php?image=https%3A%2F%2Fi.imgur.com%2FMXSRRPY.jpg&hash=0787e3cfe7bb5c2f49146bb2e502f4c1
  3. Maniac

    Ncase M1 "tophat" mod & build

    Update - 29.03.2020 - Did some changes to my "tophat"-build. Details & photos here.
  4. Maniac

    Prototype SLATE AIR & AQ, (15.4L and 19.9L) >>HUGE CHANGES<< modular cooling, Looking for Feedback!

    One idea could be to use hot-swap sockets for the power switch, instead of soldering it to the wires directly. This way we can choose our own switch-type :) I've done this to two of my mech-keebs and it is a awesome feature to have.
  5. Maniac

    My new Ncase M1 build - see it here!

    Don't know much about this since I have a v5 but do you really need the two 15mm fans under the GPU? Doesn't the v6 have better airflow for GPU?
  6. Maniac

    GTX 1080 cooling issue

    Allright, I installed GPUTweakII from Asus (instead of using MSI Afterburner), and it allowed me to set a proper fan curve on the external fan headers. Now I have fans running at 36% on idle, inaudible and keeping my GPU temps in low 30's 👍 Very happy with the result 😄 Will also test flipping...
  7. Maniac

    GTX 1080 cooling issue

    After several testing I actually do agree with you, on high load it is decent, and while gaming it almost never goes above 60C and stays more quiet than before. It was just the ide temps that kinda put me off, compared to what people usually report when they first use the Accelero III. One...
  8. Maniac

    GTX 1080 cooling issue

    Thanks for all the responses. I've just done the conversion to Accelero III on my "Asus ROG Strix 1080 Ti Gaming", and I'm kinda worried. I do believe that Accelero III is a good cooler and this is probably something I have messed up or not done correctly. As I mentioned my build is a bit...
  9. Maniac

    GTX 1080 cooling issue

    @psykix Just curious on how your gpu mod went? Are you satisfied with the thermals & noise? I'm thinking of doing the same in my build. Currently I'm just using the 1080Ti Strix with the shroud removed and two noctuas underneath set as exhaust. There is a 5mm gap between the fans & the gpu and...
  10. Maniac

    NCASE M1 V6 info

    I was only thinking about the plates, not the entire module/kit. https://ncases.com/collections/m1-accessories/products/m1-front-io-plate-kit
  11. Maniac

    NCASE M1 V6 info

    Nice, thanks for this 👍 Question: - The I/O front plates are only V6, I cannot use it on the v5? - Any chance we can get single side-panel & front-panel available (don't need the entire kit)?
  12. Maniac

    NCASE M1 V6 info

    @Necere do you know how thick the tempered glass panel from w360mod is? Is the reason v5 cannot use the panel due to the 4 screw holes needed in each corner? Also, would it be possible to order the v6 case feet anytime soon?
  13. Maniac

    Prototype FormD-P1 (Sidearmd) 280/240AIO Support Case

    Would it be possible to choose what chamber the Mobo and the GPU are in (Left/Right)?
  14. Maniac

    Prototype FormD-P1 (Sidearmd) 280/240AIO Support Case

    Very nice & clean looking design! 👍 Think I'm more interested in the Vertical case, but the horizontal one is also very nice. Especially since it's all mesh. If I was to choose between T1 or TMach1 horizontal, I would choose TMach1. Love the fact that you are considering a window option as well...