Recent content by LiYonJin

Out of curiosity, for the VK3, is there any plate support at the bottom, or isit a big cut out? as I'm having trouble finding a photos of both bottom designs, because I was just thinking to use double tape to support a HDplex-400w even if you think its uncompatible in terms of no screws holes to...

just to confirm if this will fit a HDplex 400W + Dell power brick set up? if so I may consider giving up my Dan case and go even smaller

Funny...glad I still use the 3M Twin Axial riser...not that I need it

interesting...if this happens I think I will sell my 1080ti and convert to a smaller case then buy a 2070 super mini, as the 2060 super aero mini too much of a downgrade

My bad, appears that Dan has cleared this up, its fine if you change it to UEFI 3.0

B450 aren't backwards compatible as far as I'm aware for 4.0 you'll have to get the new mobo x570 to use any 4.0 features for the new Nvme M.2 and the new AMD Navi GPU(5700/XT) only the CPU is backwards compatible as its AM4 socket Will any graphics card work with PCI-E Gen 4? Yes, PCI-E 4.0...

move the ssd to the front of the case, add a noctua fan to pull more air under the case.

if you add more vent holes on the window panel it would help airflow intake as you lack in vent holes

your fan duct facing the wrong way

you have to remove the front usb as it be in the way, probably better off with a fan cooler.

Cryorig C7 Cu: - CPU: - GPU: Cryorig C7: - CPU: 78C - GPU: 71C Noctua L9i: - CPU: 88C - GPU: 70C Noctua L9i with fan duct: - CPU: 79C - GPU: 70C BlackRidge v2: - CPU: 90°C - GPU: 71C BlackRidge v1: - CPU: 96°C - GPU: 71C Asetek 645LT - CPU: 77°C - GPU: 70C

you need to bleed it better, by moving it about as you fill it to remove the air bubbles

Notice SFFLab done half a job on updating the dan A4 information

I totally agree, the case litre size at 7.25L can be kept the same its the perfect size, we already know what can be done on the next design, like flipping the case upside down to drop the temp by 10c, addtional vent holes at the back for a x1 40mm fan, moving the type c port to the gpu side for...

regarding the changelog for v4, was the psu lifted up 5mm? and PWSW cable made longer for better access ? feels like there wasn't much changes now