Recent content by Link1712

  1. Link1712

    Production Sliger SV590 and SV540 - Vertical SFF Cases!

    Trust me, cooling both gpu and cpu with a 240mm rad is more than enough. I tested it with an Overclocked i7 8086K @5GHz and an Overclocked GTX 1080 Ti @2050MGhz cooled by an 140mm Monsta Rad and it was all good with both stressed to the maximum with Aida 64. So a 240mm Rad should do even better.
  2. Link1712

    Prototype Neutrino : a 4L case dedicated to thin mini-ITX with discrete GPU

    Awesome tiny setup you got there! I was wondering if you had to do some custom circuitry for the switch or if it works like any other ordinary switch? All in all, great job :thumb:
  3. Link1712

    SFF.Network CES : Digital Storm

    It is a 92mm radiator, the fan is a Noctua NF-B9 Redux. With any thickness the Radiator will never be able to cool the CPU yet alone cool the whole loop once the GPU is included. A friend of mine and me have tested that, due to a project of our own. It also can't be a 2080ti since there are no...
  4. Link1712

    Prototype Full Custom Liquid Cooling that fits in a Backpack - 13L Tempered Glass

    Hi, thanks for your comment! The overall dimensions without protrusions are 393mm X 213mm X 151mm We‘re using 1,5mm steel for a stable and solid built. All the parts are powder coated. We‘re running two Noctua 140mm Chromax fans and yes, can‘t wait for a Black and 140mm version of the new...
  5. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    Well we already have a 600W version. If anyone is interested in one of those two samples i mentioned earlier, just DM me.
  6. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    But even with a noctua fan, it will be very loud.
  7. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    These are usually super loud tho. The 40mm fan ramps up to earstriking rpm and even by swapping those, they will be super noisy.
  8. Link1712

    Prototype Oki-Doki : a GPU bifurcation and watercooling dedicated case, from 9 to 14L

    Haha, hopefully we wont make an exception ^^
  9. Link1712

    Prototype Oki-Doki : a GPU bifurcation and watercooling dedicated case, from 9 to 14L

    Luckily, the 600W psu has no coil whine whatsoever, even under full load of gpu and cpu. The giant transformers you can see on the side are made here in germany so they don't whine at all.
  10. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    I can surely make something up with them. But it depends on the specs.
  11. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    Ah what i forgot. Yes i am communicating with them actively. They will reply to me within maybe 12h usually.
  12. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    So the input is 19V. It assures maximum efficiency so the psu could almost be cooled completely passive. Almost i say, because there is a little bit of airflow through the case recommended, although passive cooling hase been tested successfully. The reason why we went with this solution is due...
  13. Link1712

    Production ONE2 DISTRO 400 - A 12V Power distribution board

    Hi there! So here is the PSU that was custom made by pico box for our case. This thing can handle 600W of combined power, which is split into 300W for the PCIE lane alone and another 300W for ATX 24 Pin, EPS and SATA. For both Power Rails you'll need a 300W External power brick. This is what...
  14. Link1712

    Prototype Oki-Doki : a GPU bifurcation and watercooling dedicated case, from 9 to 14L

    Im new to this Forum but i didn't even give you feedback to your case. Seriously, if i was into multi gpu setup, this would be my dream case. Good job, seriously! I know the hassle of going through this, to always worry and tinker if it is going to work out the way you want etc. In our 'Case' (i...
  15. Link1712

    Prototype Oki-Doki : a GPU bifurcation and watercooling dedicated case, from 9 to 14L

    Thats the PSU And these are our power bricks The PSU measures 108x180mm