Recent content by LcsWnbrg

This ideas is perfect. But one question, why only SFX PSUs?

Its now a nr200 in vertical. Its quite tempting but since CPUs, GPUs and PSUs are hard to get I can not afford to build a PC this year

While I took a look at the pictures I noticed that there are only three PCIe Slot Covers. But I have seen may MoBos that are having a strange PCIe layout like Gigabyte often dose. So I think it would be a good idea to add a fourth, since a lot of Graphics Cards are 2 and up Slots thick. From the...

I love the Idea, I was looking for a nice and not expensive build with a small footprint. The point of mATX MoBos and ATX PSUs is that these are cheaper that the ITX counterparts. I'm so happy that I found this one, I was searching for a good case. Now is the PSU an 14cm ATX one or is it bigger...

I you took a look into the 3D Files and thought it could a ATX PSU fit if there was no top fan and no push pull. Im talking about the BTX ATX so 140x150x8,4mm or would it conflict with the top pannel and GPU? I`m to inexpieranced with the 3D software so I am not shure. But if it would fit it...

Well I dont think that I should try a custom water cooled ssfpc for my first PC build at all. To today I only serviced and upgraded PCs, some of them I dissasambled completly and rebuild them. Since the good parts are hard to get or selled for scalping prices I have to leave my Gigabyte Aero...

Do you have some experiance with the cooling capability with these 180mm rads? How is the noise and at what tone? Youre making me concider to raise my buget for a build

I need to forget this or sell a a kidney. Is in the case enough room for a D5 or DDC?

Some Days dreams come true. Are there any estimated prices? I guess it would be around the BIG1.

No.With option 1 what I meant was to leave the top, front and back as they are and do the side pannel a black mesh. For Option 2 the hole pattern for the side pannel (in white) with Screwholes for 120/140 fans/rads

A complete black mesh cage with the white frame (top, front, back and buttom) would be absolutly georgeous, but than the mesh under the other pannels had to be the same. With that the Rad would need some support from a carrier. Another option would be to go like the NR200 hole venttype with a...

So the GPU width would be the standard size or about 14cm? Would it be possible to make the vent in the side pannel bigger, so the GPU could exaust out of the side? Or even better would be a complete Mesh Pannel in style of the front and top? The Radiator size is limited to max 240 because of...

This are some sad news, I would love to see a competitor to the SSUPD Mesh. Sadly this Idear did not got the attencion the SSUPD Mesh. This concept has better AiO/Watercooling compatebilities and would not have some of the PCIe riser problems with Gen4 GPUs, MBs and CPUs with gen 3 risers

Maybe if possible it could benefit to make a small duct over the radiator to only exaust in the MB compartment and do a deshroud mod on the GPU. Casefans are quieter and have more power.

I also thought of switching the fan orientation of the PSU so it would pull from the Back and push into the case. But this depends heavly on the PSU and persons skills