Recent content by Kiborato

Back to the drawing board You may have been under the imppression, that this Concept has been turned into an aimless drunkards driving lesson 😒 . So I am taking some time to do some experimenting with the following two Topics. K1 Concept Ambition Expanding the K1 Concept to an Family of...

Patreon & K1 Max Launch Creating these modular and versatile ITX PC cases takes a lot of time and effort. But hear me out! It all started with the Kibo K1 240 as an novelty project, bringing modularity and design together to create a 3D-printable Competitor to the Boutique ITX Case...

Result: K1 Max v1 Back-Bone The whole Assembly got moved down for about 10mm to get more headroom for GPU and Powerplug relocation above the Motherboard-Cut-out. The Back-Bone had to be thickened to 8mm to adjust to the demanding thin parts between the cut-outs. Motherboard/Riser Beams...

K1 Max Hey Guys, It's been a while🤣 Hope there is still some general interest in this Project, I am trying to pull out of a Hiatus. Maybe some of you are still patient enough to expect me to post anything about those empty promises I made months ago. So to regain some momentum, I will resume...

Hey Togan, First of all, Yes the current file naming sceme is a mess. I will go through the file choosing with your system as an example: Required Prints Checklist: ☐ Front panel ☐ Front Barebone + Riser ☐ Mid GXX ☐ Backplate GXX ☐ 2x Main Beams Cosmetics: ☐ Grills ☐ Sidepanels ☐ Feet ☐ Hats...

Thanks for sharing your design idea!👍🏻 Innovation is always welcome! I like your idea of a hexagon-prism shaped Case. Having more functional surfaces to provide more "Slots" for cooling solutions and decorative elements (e.g. FLT Reservoirs, mini-Displays, combed-cables, etc.)

[Placeholder for old irrelevant posts]

[Placeholder for Instructions]

K2 is a 3D-print-first approach Case, aiming to cater to these features: 280mm Radiator Support [Hats] Easy Assembly & Maintenance Sandwich & Classic 2in1 approach Early Render [1.8x3.6x2.1cm] | [2.0x4.0x2.5cm] Structural Composition: Rad-Cage & Core-Cage Corner Joints Main specs...

Another 3 hours gone by:😒 Resource Link STEP

Kiborato submitted a new resource: EK 3080 Strix Waterblock - EK-Quantum Vector² Strix RTX 3080/90 ABP Set D-RGB - Nickel + Plexi Read more about this resource...

Wasted 10 Hours modelling this Waterblock. Note that you need to insert the pcb picture manually. ASUS ROG STRIX 3080 Waterblock EKWB

Wasted 3 hours on modeling an EK waterblock, yeah its uncomplete. Should I put it under resources, if finished?

Small update Back from Hiatus The K1 project has been in a hiatus state since November 2021 without any new developments from my side. Main reason being the death(shattering) 😭 of my iPad Pro(12.9" 2018), where this all started as a small side project. Using all free time during my commute, my...

Self adhesive magnetic tape is more bulky and weaker in comparison to the thin nickel strip & magnet combination. more info: the magnetic tape has a thickness of 2mm and is made of a mix of materials, magnetic strength comparable to N08 or lower 🙃 Also the nickel strip looks nicer if exposed...