Recent content by justkeevin

Amazing temps dude!

If i could install the heaksink without disconnecting my tubing I would. bleeding this was such a pain in the ass haha.

Been too busy perfecting my build finally got some photos.

I have 2 different fill/bleed ports. I have a T fitting on my GPU outlet and I just laid the case on the side to bleed for about a day or 2. On the other side I have an ek-quantum torque drain valve below my radiator outlet.

I love it.

Loving it! I just finished my build too! I'm waiting on a custom 150mm 24pin and a 120mm slim fan for the bottom. Currently in the process of bleeding it. Should have gotten clear tubing, would have made my life so much easier. Did you drill a hole for the fill port?

Mine come next Tuesday but won't have time until the weekend to start messing around. By chance, have you measured the length of the psu cables?

People in Canada already got theirs. I don't know how long the PCIe cable is, was thinking about moving the card to the outermost IO slot and using the space behind cause of the front IO port obstruction. Might open up a few more mm's. The pump placement has been driving me nuts especially...

Yeah as soon as people start receiving the cases, I gotta figure out the cable lengths, esp the 24 pin. I did a mock up of my drain/fill loop, based of this: This is essentially how I'm gonna have to position my pump. Outlet facing upwards (Read that it shouldn't be an issue). I'm gonna have...

I don't know if you followed Fabios' T1 build. I think I'm gonna do what he has currently. He has a pretty long GPU as well. The Q58 has about 67mm of depth.

Have you looked into the R160 with a DDC? Might be skinny enough. I have considered the Aquanaut Extreme but I wanna wait for reviews.

I appreciate everything you wrote. Very informative and super useful! As for the lack of USB C headers, I'm looking into a USB 3.0 y splitter with an adapter for the USB C. Probably a reduction in speed but overall a usable port. -Splitter with Adapter I've also been messing with undervolt...

Look into a bitspower magic cube with a DDC pump. You can probably fit it into the negative space of the gpu side (Top right).

Very inspirational! Curious if you have the dimensions of your Magic Cube and DDC 1T Plus? I'm still looking at pump options. I could easily use the DC LT 2 with the Eissation 40 DC LT but I fear it's not powerful enough. So I'm looking at a small SFF friendly DDC pump/top combo. Planning a...

Thanks for the advice! Definitely gonna do a little more research! I've been trying to find other builds with people using a 280mm with similar specs. As for the pump, my GPU is on the longer side roughly 265mm. Doesn't leave me much room for a ddc or a D5 pump. The DC LT 2 fits perfectly but...