Recent content by junaling

Files are available on etsy I just posted recently, the tallest piece is 325 sos you'll need a bigger printer : https://www.etsy.com/ca/listing/842076586/96l-3d-printed-sff-computer-case?ref=listing_published_alert

Oh yeah, it took almost 5 days to print the outer shell !

Yes, I printed myself, I have an enclosed CR-10, used ABS at 50mm/s, I went slow as I was worried about layer shifts and ringing at the upper layers. Printed at 0.2 layer height

I used the DAN A4 design posted here for reference then adjusted some of the measurements as I go along the design process

Yes this was inspired by the mjolnir case :) thanks

The outer shell is 5mm thick, the internal frame is quite sturdy due to the threaded rods

2 M3 socket head screws, through the diamond holes at the top and bottom screw to the internal shell, barely visible and the screw head is a snug fit

hi all, Just finished, after a few spools prototyping, all plastic pieces are printed with ABS and held together with threaded rods, I'm triple booting so I need room for at least 2 SSDs, one OS on the NVME, this case can accommodate 3, inspired by the mjolnir case. 3d printed Mini ITX case...