Recent content by GeSong

The motherboards manufacturers already released the Ryzen APU supported BIOS a few months ago

I'm just curious if AMD will make the 28cu on into a Ryzen 7 APU. According to other people's responses, the 28 CU apu will not be compatible with the current AM4 motherboard

What about the 28 CU one? Ryzen 7 2xxx G?

My idea is to move the flex-atx power supply beside the single pci-e slot and have two 92mm fan on the other side of the case as the intake. Also, Cryorig C1 and C7 are different products. I think C1 is 72-74mm tall with a 140mm slim fan (120mm mounting holes on the heatsink). So if you can make...

Nice work!. Could you make a itx version based on this structure? Only need two 92mm fan installed on one side as intake and no other holes needed except the vent on the top( when put the case horizontally). Moreover, instead of using the TFX power supply, would modular Flex-Atx be better for a...

Thank you for the sharing. Personally, I still think 82-85mm heatsink support would be better. With that clearance, both NT06-pro and Cryorig C1 replaced with a 140mm fan(25mm thick,120mm mounting holes) can be installed in this case. Due to my previous experience with AMD'S APU, it needs to be...

That's really cool! I really like the design for the top panel, intake from one side and all the heat directly get out the case. I would like to buy one if it supports Flex-ATX power supply. In that case, you can put a silverstone nt06-pro inside it!

https://www.ebay.com/itm/For-Intel-115X-1151-1155-1150-Active-Mini-ITX-CPU-Cooler-Low-Profile-Blower-Fan/272852114713?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D48754%26meid%3D0775ca54551b4efc92052ae44f25f390%26pid%3D100011%26rk%3D9%26rkt%3D9%26sd%3D112513915386&_trksid=p2047675.c10...

I'm just curious that if there is a better version one? I had a MSI Trident Z which uses a smiliar cpu cooler and it's very quiet efficient. I really hope someone can make a better blower style CPU cooler to fit in my RVZ03

My Current Build: CPU: Ryzen 1700X Ram: G.Skill Trident DDR4 3200 16G Motherboard: ASUS ROG Crosshair VI Hero AM4 AMD X370 Graphic Card: GTX 1080Ti Founder Edition WI-FI card: ASUS PCE-AC56 802.11ac Dual-band Wireless-AC1300 PCI-E Adapter Power Supply : EVGA SuperNOVA 850 G3 Computer Case...

Cryorig's website provide paper model of this cooler. You can use a normal printer to print it and test the compatiability. If it's doable, I can buy one and send it to you for free

Really hope you can make a 2011-narrow bracket for Cryorig C1, that will be the best cpu cooler for my silverstone FTZ01 case

哈哈哈，CHH坛友来支持一波，我觉得那个延长线可以换成台湾那个立热工业的线，据说很不错，就是价格高了点

Nope. L12 is good though. I currently have a FT03 mini itx case and using R24 for my E5 2686 V3. The IDE temperature is about 50 celsius and runs around 90 celsius on AIDA 64 stress test. The problem is that the L12 only has 4 heatpipes and if you want to use a standard 120mm fan, the total...

LOL,That's true. I got 2 G Unique DC-ATX power supply in China. Now I'm in America, I always want another one to build a htpc.