Recent content by Flipping_A_pebble

  1. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Good on you man, for managing to prove people wrong that the evga xc3 fits in 2 slot mode! People on this forum need to be more open on what fits and what doesn't if specs are close, instead of just saying, "it's out of spec." Anyway, did you notice a difference in noise running the gpu with...
  2. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Yeah man the evga xc3 fits in two slot mode. This guy live streamed his install & build process on twitch. He did however remove the e badges that sit on top of each of the gpu's fan hubs. The backplate doesn't need to be removed, but he does recommend custom cables so the pcie cables won't...
  3. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Nah, it fits like a glove mate.
  4. Flipping_A_pebble

    News Thermalright AXP90

    Does anyone know if these 90° am4 brackets from thermalright are available to be purchased separately? I know someone on tabao sells their own custom version, but I rather have the official thermalright set.
  5. Flipping_A_pebble

    News Thermalright AXP90

    Interesting a 100mm fan!?! Which fan are you using and does that fan require VLP memory? I had assumed that the black ridge would outperform all similarly sized coolers if a slim 120mm was attached underneath. My initial question was how it performed with a 92mm noctua because I didn't want to...
  6. Flipping_A_pebble

    News Thermalright AXP90

    So what is the consensus on the best sub 47mm cooler. I've seen some users commenting that the AXP-90 full copper is superior to the Blackridge v2. However the review below tested both the AXP-90 and the Blackridge and favored the Blackridge on raw cooling performance with the right fan...
  7. Flipping_A_pebble

    News Thermalright AXP90

    Finally a legit graphene coated copper heatsink from Thermalright themselves. Please say that it is so! Oh and it looks like they added a motherboard backplate as well or did the other versions come with one too? Anyway this is the one that I have been waiting for!
  8. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Hey do you guys think that the Evga XC3 models will fit in dual slot mode? If so, is there a chance the mesh side panels will cause turbulence with the GPU fans pressed up so close? Photos of XC3 and FTW cards
  9. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Hey @Wahaha360 I love the open mesh design! Do you think that if I add a Cryorig C7G or a Thermalright AXP90 which both are 47mm tall, it will cause turbulence since the fan will be very close to the side panel? Or is the mesh open enough not to cause turbulence with a fan pressed up against the...
  10. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    Hey @Wahaha360 will May's batch #2 run have an all silver variant available or will we continue to see all black only?
  11. Flipping_A_pebble

    Production FormD T1 Classic (READ FIRST POST)

    I'm considering this case and I was wondering if you could natively flip the case. For example, could you put the bottom panel on top instead, just like you can with the Ghost S1. This would be cool because this way you could flip the case and have the fans on top exhausting hot air up instead...
  12. Flipping_A_pebble

    Cooling Thermalright Silver Arrow 130mm Tower Cooler

    Hey looks like it was just a perfect fit on that mobo! How difficult was the installation for that am4 cpu, and did it come with fan brackets that fit the noctua fan? You think with a lot of fiddling you be able to squeeze a noctua fan in between those fin stacks or is it just not worth the...
  13. Flipping_A_pebble

    Cooling Scythe KazeFlex low-profile fan review.

    Dude I can't find these anywhere, do they still exist?
  14. Flipping_A_pebble

    NCASE M1 V6 GPU Compatibility List

    Hey Necere! Would the Powercolor Red Dragon 5700 XT, which is 132mm tall, fit if you added low profile pcie connectors? For example, these are 180 degree pcie adapters that only add 7mm to the height, which would give the Red Dragon a total height of 139mm at the pcie power connection. Would...
  15. Flipping_A_pebble

    Cooling Thermalright Silver Arrow 130mm Tower Cooler

    Dude if you can post a pic of an A12x25 fitting on this heatsink that would be so awesome! It would def push me to picking on of these up.