Recent content by exanders

This power supply has so many different behaviours..., for me it starts spinning at power on with the noctua fan.

I followed the advice as well and just had the courage to re-open my velka 3 and the PSU to replace the Noctua fan with a Sunon Maglev ordered on ebay. It is definitely louder but nothing compared to the fan that came with the FX350-G. Considering how hot the air coming from the PSU is, I...

Hi Mothman, The FLX edition (and maybe the non-FLX now I see it...) of the Noctua NF-A4x10 as described on their website ( https://noctua.at/en/nf-a4x10-flx ) comes with a 3 to 2-pin adapter, so you shouldn't have to cut any cable. You can see it on the right of this picture: You may have...

Ok, I bought mine from Amazon France. I wonder if this cable has to do with fan speed management, because for the short period I used the psu, the fan was only going up and never slowing down (at idle). I will first try without the cable plugged to see how it behaves... Good point... and a...

It's good to know I'll have to open it again to swap the fan cables. I used the 3pin to 2pin converter provided with the Noctua as well. @Jace The question is more am I supposed to leave it unplugged ? Maybe for EU standards ? Was yours plugged in? Since the psu's warranty is now void after...

Hi everyone, I just did the replacement with a Noctua NF-A4x10 FLX today but I didn't test it yet since my motherboard was defective (pch fan broken), but here are several pictures of the operation: (On this picture ^^^ , the disconnect cable is not the fan, it was already disconnected so I...