Recent content by dondan

  1. dondan

    Asetek645LT higher temps than NH-l9i???

    The radiator fan has to suck air through the rad into the case. Make sure you have custom cables with good cable management. Make sure the pump has good contact to the CPU and the pump backplate sits correctly.
  2. dondan

    DAN C4-SFX - Update 14.05.2020

    @Schnaxelhuber Just get a GPU mini 4 pin fan to standard 4pin adapter like this: and a 4pin Y-Adapter Then you can use MSI Afterburner to control the speeds
  3. dondan

    DAN C4-SFX - Update 14.05.2020

    Please take a look in this gallery:
  4. dondan

    Motherboard Asrock B550 Phantom Gaming ITX/AX

    @ASRock System Very nice board.Perfect socket position for Noctua C14S, USB-C Type-A internal header, clean layout, enough fan headers and 2.5Gbit Ehternet.
  5. dondan

    DAN C4-SFX - Update 14.05.2020

    What do you mean with preparations? Yes two 120mm will fit under the GPU. It depends on your GPU slot height if you can use slim or standard ones. Furthermore it will be possible to do a "Ghettomod". For this you remove the default fans on your GPU and replace them with the two 120 case fans...
  6. dondan

    DAN C4-SFX - Update 14.05.2020

    @Xoroxronis Yes I understand and I will provide the information very clear and good visualized like this: Here is a quick answer: Bottom radiator max dimension incl fans: 125 * 295 * 52 ( W*L*H) Side radiator max dimension incl fans: 125 * 295* 65 ( W*L*H)
  7. dondan

    DAN C4-SFX - Update 14.05.2020

    @jaeparku I can tell you more after my testing. But I think the C14S offers a better cooling perf. I do prefer the U9S because of the look with two 80mm back fans and the easy installation :) @murC No sorry this case does not have support for 3.5" HDDs, because it is a pure gaming workstation...
  8. dondan

    DAN C4-SFX - Update 14.05.2020

    Yes i will update the fitst one in the next days maybe this imgur link helps in the meanwhile:
  9. dondan

    DAN C4-SFX - Update 14.05.2020

    Yes sir this will fit on the next sample :)
  10. dondan

    DAN C4-SFX - Update 14.05.2020

    This made my day 😂
  11. dondan

    DAN C4-SFX - Update 14.05.2020

    Update: Some reshots with the Noctua U9S + 2x80mm Noctua Redux at the back panel. So far my favorite build. Very clean cable management with default length cables, and super clean look with the U9S. BTW you see the alternative routing for the power cord to fit 2x 80mm fans. Also this is the...
  12. dondan

    DAN C4-SFX - Update 14.05.2020

    @Harding Yes this is on my list. I will add some slot vent holes on the PCB.
  13. dondan

    DAN C4-SFX - Update 14.05.2020

    Update: 240 AIO in classic layout with two powerful Noctua A12x25. Very easy to build no problem with cable management. Also a very nice build experience. Thank you, stay safe Daniel
  14. dondan

    DAN C4-SFX - Update 14.05.2020

    @McPhee: @McPhee & @jaeparku It is possibe to install 2x80mm fans or 1x 92mm at the back. The Gigabyte X570 does not have enough fan headers so i didn't installed it. @imode You can but you have only 65mm for the heatsink. @AlexTSG Yes I will test it.
  15. dondan

    DAN C4-SFX - Update 14.05.2020

    @ignsvn: Yes it can hold 3 slot cards. Max GPU size is 62*115*305 (Thickness*Height*Length). The 115mm height limit is from the bottom of the PCIe Port to the top of the power ports. So if the power ports are lowered the card could be 128mm in height. If you use low profile 180° angle power...