Recent content by Borafuzzle

Happy Thanksgiving. My Asus B450-I had given me nothing but problems. Last Asus product I'll be buying.

As it turns out, you can fit a pair of 120 mm Scythe slim fans onto the ASRock Challenger 5700 XT and still have it fit into the SM570. Completely silent now with better temps. Yes, the one on the left is crooked but I don't feel like redoing the zip ties.

You'd have to drill and tap holes for that, but yeah it can be done.

Yeah that's the one. Got four of those in my build

Noctua NH-P12 reduxes are $13, perform nearly as well and are very quiet

Nzxt x62 will have no problems

In my SM570 (both vented) with 3700x, Corsair H100i as intake, Zotac 1070 and two Noctua NF-P12 1700 RPM as exhaust on the bottom, I am getting no more than 75 C on CPU during a stress test and 72 C or less for the GPU. Using the AIO as intake will always result in in lower CPU temperatures...

Some of them also come with fan clips. Just depends on what you've been sent

1. you'll need the pigtail. The card width is 140mm which might even be pushing it for fitting in the case without an adapter for the power cables. 2. The IS-VC45 will work better of those two but I encourage you to look at the Id Cooling IS-60, Cooltek LP53 or Cryorig C7G for better cooling

You're planning on using the v2? The tubes coming straight out the block will make it so it won't fit inside the case

Which CPU cooler are you using? Could it be too high of mounting pressure being counteracted by applying the standoffs?

Honestly, I hate making SATA cables so I just ended up using the stock one. There's probably ~10cm of slack that can be removed between the psu and the first of the SATA connectors (the one that goes to the AIO), the lengths between the connectors is pretty good though.

OK. You'll want your 24 pin to be 175mm, the CPU 8 pin to be 250mm and the pcie cables to be 270mm.

Which motherboard and GPU are you planning on using? This helps with getting accurate cable lengths.

Isn't the SV590 capable of housing a 360mm?