Recent content by AURMEND

  1. AURMEND

    Flex psu noise

    I have the noctua AcBel PSU that failed within the week and my trusty fsp 500w gold without one. I might just put a noctua fan on it
  2. AURMEND

    Missing products for STX builds.

    Lazer3D front I/O. That's what I'm currently using on mine
  3. AURMEND

    Flex psu noise

    My fsp-500w gold is not loud at all. Highly recommend one. Make sure the have your GPU connectors and DO NOT get the ACBEL 500w Gold from GEEEK. I think Delta and FSP are fine, if you have are running a super quiet setup you can easily upgrade it to a noctua fan.
  4. AURMEND

    Where to buy Flex PSUs (beside Geeek that's out of stock)

    I think my GEEEK flex PSU has problems. My NVME drive won't show up as connected which upon looking it up it's usually caused do to the PSU, so I disconnected the AC power and reconnected, and it showed up. Powering it off and on multiple times did not work. As of now I highly recommend NOT to...
  5. AURMEND

    Prototyping DAN HSLP-48: A powerful sub 50mm heatsink

    The was only about or less than 3mm Of space between the case panel and the fan.
  6. AURMEND

    Concept 5.37L Aluminum extrusion Frame

    Black Ridge Installed https://smallformfactor.net/forum/threads/dan-hslp-48-a-powerful-sub-50mm-heatsink.2387/post-147754 Need to make new top coverfor my original design. Might choose acrylic, you know a website that can make them?
  7. AURMEND

    Prototyping DAN HSLP-48: A powerful sub 50mm heatsink

    NH-L9I Black Ridge V1 As youy can see its basically 10 degrees cooler. I have the 120mm Fan installed on the Asrock Z390 Phantom M-ITX. No case fans yet. Notice the Motherboard temps. Can now OC to 4.9Ghz without overheating, Previously it was 4.7Ghz. 8C difference between 4.9Ghz and...
  8. AURMEND

    Concept 5.37L Aluminum extrusion Frame

    So it's possible to make any of the panels acrylic but not all of them. Just have to modify the file which will not be hard. Even on my original design you can do that for the cover. If you want to make it fully acrylic just put the panels on the outside of the frame. It will take me a few...
  9. AURMEND

    Concept 5.37L Aluminum extrusion Frame

    This is just a prototype since the aluminum extrusion is the most expensive part. It's not meant to replace my original design Sturdiness I have no idea but my guess it will be flimsy towards the middle. Total cost should be around $40 if nothing goes wrong with the printing process. $20 for...
  10. AURMEND

    Concept 5.37L Aluminum extrusion Frame

    All 3D Printed case (UNTESTED) <<< Click me to download 5.01L 312*268*60
  11. AURMEND

    Prototyping SC3-STX: 3.5L - Internal PSU - 1080ti Mini support

    Ah, once again I didn't read fully.
  12. AURMEND

    Prototyping G-uniq 3.7L brickless 1080ti mini case breaking record

    Holy shit, why didn't j find this sooner. What's the price going to be for the whole setup? And the price just for the PCI-E cable and the low profile power connector
  13. AURMEND

    Prototyping SC3-STX: 3.5L - Internal PSU - 1080ti Mini support

    But would it fit an NH-L9i? And what's the maximum RAM height? You got a link for the AC power female plug? I'm having trouble finding one for my case Edit, I guess the noctua cooler won't fit after reading more. Don't forget to design something for the PC stand
  14. AURMEND

    Where to buy Flex PSUs (beside Geeek that's out of stock)

    We will find out. I ordered one. Should come in a week or 2. The PSU was shipped out of Taiwan. 🤔
  15. AURMEND

    What's on Taobao

    Interesting case. They use threaded cubes on the cornerS to screw in all the panels.