Recent content by Anders

  1. A

    Production SFFtime presents: N-ATX V2 - 15L evolution of console case that supports ATX size parts

    Hello all, just finished a build in the N-ATX v2 and thought you guys might enjoy my odd configuration. Link to the picture of the finished build. Long story short, I always preferred small form factor builds and recently got into LLM and AI. Most cost effective LLM builds usually involve...
  2. A

    Lian Li/DAN A4-H2O

    I like this alternative design, and the 0.9L increase seems reasonable if it allows better AIO and GPU compatibility. How would the IO connectors be fitted to the case? Would they be part of the side panels or frame? Can they be flipped or swapped to different positions?
  3. A

    Lian Li/DAN A4-H2O

    I like the first design better as it seems less blockly. The capability to fit an AIO for cpu cooling and enough space for a decently sized air cooled gpu would accommodate many possible hardware combinations. I’m curious, would there be a version with a front IO? I didn’t see it in the videos.
  4. A

    NCASE M1 V6 GPU Compatibility List

    For those interested in 3080 FE water block made by EKWB, they updated their website with schematics. they also have diagrams for the other vector water blocks, so you can check if they fit your case
  5. A

    NCASE M1 V6 GPU Compatibility List

    Ah, I don't have the XC3. I was using dimensions in the diagrams provided by EKWB.
  6. A

    NCASE M1 V6 GPU Compatibility List

    Possibly the 29mm is referring to the whole assembly of water block and backplate. Using the EKWB water block for the XC3 as an example, its 20.75mm + 5.20mm (Block + backplate), not including the thickness of the actual gpu in between.
  7. A

    Production Aquanaut Basic/Extreme - Ultra Low Profile CPU Block & Pump Mount Combo

    @RZEX When you used EK mounting kit, did you just use the EK mounting plate? or did you swap out everything? including the Precise Mount screws from the supremacy EVO?
  8. A

    DDC pump for Iceman reservoir

    There are DDC pumps made by Barrow and Bykski. I don't think there are any major differences between barrow and bykski, both would fit in a ddc housing. There are two main grouping, a 10W version which is supposed to be quieter and equal to the EK-DDC 3.2. Then there is the 17W version which is...
  9. A

    NCASE M1 V6 GPU Compatibility List

    Thanks for the information. Hmm, that means we have to choose a reference sized board (FE, Palit/PNY, Gainward or EVGA XC3) for water cooling, as the custom boards with water block like the Asus TUF becomes too tall. Otherwise one can water cool the CPU and de-shroud the GPU for a mixed...
  10. A

    NCASE M1 V6 GPU Compatibility List

    How much additional height/width do we have to allocate in order to use a GPU water block? New to water cooling, looking at the pictures online, I see there is that terminal?/block where the water cooling tubes connect. I understand that various GPU water blocks dimensions (and the GPU they fit...
  11. A

    NCASE M1 V6 GPU Compatibility List

    for EVGA XC3, 1) black does not have a backplate, 2) gaming includes a backplate, 3) ultra includes a backplate and a factory OC
  12. A

    NCASE M1 V6 GPU Compatibility List

    Hi, I just would like to chime in that the 1080 TI MSI Gaming X (without the fan shroud) fits in the Ncase M1 V6 with literally no room to spare. The PCB is 140mm tall, but with the V6's refinement, there is no interference from the chassis flange at the rear-left. For the card, the PCIe power...
  13. A

    NCASE M1 V6 info

    Got my black ncase m1 today, working on it now. Can confirm, both I/O and non-I/O faceplate are made with the NCT method, not laser cut. Overall the protrusion are noticeable but I think it is not too bad. Maybe @Necere can share the specs of the faceplate and you can replace them with what you...
  14. A

    NCASE M1 V6 info

    There are 2 statements actually. 1) "Orders placed by September 22nd are shipped by September 27th" - i presume for new orders 2) "M1V6 orders made before September 15th 23:59 PST are on schedule to ship from September 20th to 25th. Tracking numbers will be sent around September 27th. " - so...
  15. A

    NCASE M1 V6 info

    Nice, thanks for the image and clarification.