Normal
The case has 2x PCIe bracket slots...in terms of card height--it could probably support a 3-slot card.Measuring with a caliper from the top of my proper-two-slot-card to the outside of the case (not perfect I know, but expedient), it is about 30mm....subtract 3mm for the unibody thiickness, and probably 1-2mm for the cheesegrater-plate below that. about 25mm in excess of a proper 2-slot card.Note, I'm using v2 of this case, there are two different versions of B6 made; it is slightly larger in all dimensions than v1, has slightly different fan config, re-organized 'front panel' ports/buttons
The case has 2x PCIe bracket slots...in terms of card height--it could probably support a 3-slot card.Measuring with a caliper from the top of my proper-two-slot-card to the outside of the case (not perfect I know, but expedient), it is about 30mm....subtract 3mm for the unibody thiickness, and probably 1-2mm for the cheesegrater-plate below that. about 25mm in excess of a proper 2-slot card.
Note, I'm using v2 of this case, there are two different versions of B6 made; it is slightly larger in all dimensions than v1, has slightly different fan config, re-organized 'front panel' ports/buttons
