Normal
[USER=21786]@charlybegood[/USER] perhaps try to increase voltage 0.1V at a time to 1.45V (or whatever you feel comfortable with) while trying tighter tRCD timings? Some of my timings are looser than yours as you can see from the OCCT screenshot below. You may find it better to raise tRP and tRAS to achieve a lower tRCD. I set all three tRFC settings to 300. Your tFAW (16) is also much lower than mine (24).When I tuned my ram, I started with the "safe" or slightly higher timings listed in the github guide before incrementally dropping them until the system wasn't stable. I couldn't hit tRC (56) = tRP (18) + tRAS (38), so I backed it up to 64 (yours is at 62). Glad to hear you got tCAS down to 16 @ 3600MHz. Great job!
[USER=21786]@charlybegood[/USER] perhaps try to increase voltage 0.1V at a time to 1.45V (or whatever you feel comfortable with) while trying tighter tRCD timings? Some of my timings are looser than yours as you can see from the OCCT screenshot below. You may find it better to raise tRP and tRAS to achieve a lower tRCD. I set all three tRFC settings to 300. Your tFAW (16) is also much lower than mine (24).
When I tuned my ram, I started with the "safe" or slightly higher timings listed in the github guide before incrementally dropping them until the system wasn't stable. I couldn't hit tRC (56) = tRP (18) + tRAS (38), so I backed it up to 64 (yours is at 62). Glad to hear you got tCAS down to 16 @ 3600MHz. Great job!
