Reply to thread

Message

Glad to see your results, I'm going for a very similar build. Same CPU, cooler, fan, and the Micron 3G2E1 sticks, on a B550i Aorus. I just got the system up and running and tried to do some quick tuning. One stick appears to be dead, so I'm only trying with one at the moment. I can get it to 3800 at 1.4v, haven't tried higher. But at 3800 the Infinity Fabric desynchronizes down to a lower frequency, I haven't tried tweaking anything else to get it to sync. But even with Infinity Fabric and RAM both at 3600, I can't boot with the timings tightened at all. I gave up for the night leaving the timings on Auto, which puts CAS at 26 lol. It wouldn't boot at 19, I didn't try any higher. I'm hoping with two good sticks and a bit more research I can tighten it up like yours. Thanks for the link to the guide.

[QUOTE="gergl, post: 233860, member: 18939"] Glad to see your results, I'm going for a very similar build. Same CPU, cooler, fan, and the Micron 3G2E1 sticks, on a B550i Aorus. I just got the system up and running and tried to do some quick tuning. One stick appears to be dead, so I'm only trying with one at the moment. I can get it to 3800 at 1.4v, haven't tried higher. But at 3800 the Infinity Fabric desynchronizes down to a lower frequency, I haven't tried tweaking anything else to get it to sync. But even with Infinity Fabric and RAM both at 3600, I can't boot with the timings tightened at all. I gave up for the night leaving the timings on Auto, which puts CAS at 26 lol. It wouldn't boot at 19, I didn't try any higher. I'm hoping with two good sticks and a bit more research I can tighten it up like yours. Thanks for the link to the guide. [/QUOTE]

Verification