Normal
Yeah I was looking at the MC220 Drive Rev 3 or whatever, but was so sad to find out it's just a little bit too long for it to fit in the hat. I can't find any proper dimensions for the Drive X3. Seems like they're using a 28mm thick rad, but can't find anywhere what the total thickness with the pump/res is. Seems like it wont fit, because limit in the hats is 60mm. 28mm+25mm = 53mm and it seems like that res is deff thicker than 7mm. However it might fit, because even on the top there is quite a bit of space between the bottom of the top hat and the PSU. So right now I'm kind of torn between getting one or two DC-LT 3600rpm pumps, and mount them to some Hardware Labs 240gts rads with the Eisstation 40 reservoir which was made to be used with Alphacools server rack radiator line up. Or I might just say eff it, and try to cram in a DDC pump below (or above) the PSU and squeeze in a tiny little reservoir in the top hat since the 2nd rad I got is a Bitspower Leviathan and has g 1/4 threads on both sides of the rad, and I'd use one of the top facing G1/4 threads to mount a small reservoir to make filling easier.
Yeah I was looking at the MC220 Drive Rev 3 or whatever, but was so sad to find out it's just a little bit too long for it to fit in the hat.
I can't find any proper dimensions for the Drive X3. Seems like they're using a 28mm thick rad, but can't find anywhere what the total thickness with the pump/res is. Seems like it wont fit, because limit in the hats is 60mm. 28mm+25mm = 53mm and it seems like that res is deff thicker than 7mm. However it might fit, because even on the top there is quite a bit of space between the bottom of the top hat and the PSU. So right now I'm kind of torn between getting one or two DC-LT 3600rpm pumps, and mount them to some Hardware Labs 240gts rads with the Eisstation 40 reservoir which was made to be used with Alphacools server rack radiator line up. Or I might just say eff it, and try to cram in a DDC pump below (or above) the PSU and squeeze in a tiny little reservoir in the top hat since the 2nd rad I got is a Bitspower Leviathan and has g 1/4 threads on both sides of the rad, and I'd use one of the top facing G1/4 threads to mount a small reservoir to make filling easier.
