SFF.Network

2022/2/26​

We have completed delivery of the first batch and the next batch will be delivered in April.
Here are some photos from the purchasers.
cooj.cc

2021/7/1​

Added a free new accessory, the halo switch button.

----------------------------------------------------------------------------------​

2021/6/22​

Two new accessories have been added
1. A black metal heat shield for insulating the GPU and PSU from hot air transfer.
2. A bracket for mounting two 7mm thick hard drives.

----------------------------------------------------------------------------------​

2021/5/6​

My website is now live and you can now book or purchase through the website.
https://cooj.cc/

----------------------------------------------------------------------------------​

2021/4/27​

Uploaded content about MQ6
Click to view>>>Sparrow-MQ6 6.8L One-piece aluminum

----------------------------------------------------------------------------------​

Sparrow - MQ5​

The name comes from a very well-known Chinese saying: ''The sparrow is small, but the five organs are complete''.
So here, I named the case after the sparrow.
MQ5 is the model of this case.

Design thinking​

The biggest feature of the Sparrow MQ5 is in the overall design thinking; I personally prefer the minimalist style, the starting point of the design is also from the minimalist, reduce the patchwork parts and seams of the chassis, so that the work from the appearance of the feeling of one piece; so from the beginning through continuous polishing, the final only now the unibody design program, complex design and process only for the minimalist look and feel.

MQ5 Specifications​

MQ5 Introduction​

I will upload a separate link for MQ6.

Sample photo​

1.Accessories​

2.Accessories show​

3.MQ5 parts display​

The shell part is the soul of the MQ5, and the minimalist style and unibody design concept create it.


The aluminum inner ring on both sides is used to fix the magnet, which plays the role of connecting the shell and the side cover.


Magnet fixed with the inlay design, this time the magnet fixed parts with 3D printing production, the surface is very poor, the subsequent injection molding method will be used to produce this small parts.



The side panel is also made of aluminum, 2mm thick, inlaid with iron to adsorb magnets.


Power connector to connect small 1U power supply and chassis

4.MQ5 case assembly​

5.MQ5 whole machine installation​

Installation of the top fan (I installed the fan in the wrong direction)


Installing the motherboard into the case


Install the power supply parts, the first power supply and power supply parts fixed, installed into the chassis, and then the bottom through the screw fixed


Finally, install the graphics card on


Side panels on both sides are attached by magnets


MQ5 is able to install two 2.5 hard drives (two stacked together), here I install one for a demonstration

Temperature test​

CPU temperature test is divided into 2 parts, the first part is not installed side panel, the second part is installed side panel
The test method is a single baking FPU, the length of 10 minutes
The test environment temperature is about 21 degrees

CPU information: R9 3900X voltage 1.1V 3.9G

Without side panel installed
10 minutes temperature: about 86°C


Installation of side panels
10 minutes temperature: about 93°C


Graphics card using FURMARK test, still ten minutes test time
Graphics card model: R9 NANO default voltage

Without side panel installed
10 minutes temperature: about 77°C


Installation of side panels
10 minutes temperature: about 79°C


Finally, I hope you like it.