Stalled Z-CASE P50 v1.1: Innovative console-style SFF PC case

Status
Not open for further replies.

TimLFoss

Cable Smoosher
Jul 13, 2019
11
0
It has too much height, for those who want an RL in the case p50, here I give you an idea. (I did not plan to publish it until I had mine mounted but I was not beaten XD)

The only thing that you sacrifice is the ssd sata because it is where the cooler is housed, and the glass requires a spacer, even if it will be 8mm or 16mm
I will put pictures when I have finished

Very interested to see how it fits, and thermal performance.
 

AstroWan

Caliper Novice
Apr 14, 2016
33
17
Hello, so since August is approaching next week, when are the cases expected to ship? I'm hoping its within the first half of August as I'll need to plan out a way to forward the case to me if its later then that. Thanks!
 

BernardoZ

Founder of Z-CASES
Original poster
z-cases.com
Feb 7, 2018
264
490
www.z-cases.com
Hello, so since August is approaching next week, when are the cases expected to ship? I'm hoping its within the first half of August as I'll need to plan out a way to forward the case to me if its later then that. Thanks!
We are on track to ship all cases and psus around end of August, as planned.
If you need further assistance to forward you the case, please send us an email.

Btw, here are some fresh pics from Jonsbo factory ?
 

JohnCA

Average Stuffer
Dec 2, 2018
55
23
Looking good, thanks for the update.
One question: until when can I order the case?
Thanks
 

BernardoZ

Founder of Z-CASES
Original poster
z-cases.com
Feb 7, 2018
264
490
www.z-cases.com
Looking good, thanks for the update.
One question: until when can I order the case?
Thanks
Purchase period will end on mid August, I'll have to confirm the exact day.

Just a heads up: we probably won't make a new batch of the P50 soon.
So this is the last chance to get the case, it will be a very limited run.
 
  • Like
Reactions: JohnCA

sfxbajan

Average Stuffer
Dec 4, 2017
58
15
Purchase period will end on mid August, I'll have to confirm the exact day.

Just a heads up: we probably won't make a new batch of the P50 soon.
So this is the last chance to get the case, it will be a very limited run.
p60? ?
 

raught

What's an ITX?
Jul 30, 2019
1
0
Hello,

I was wondering if it's possible for you to hinge the glass panel like a door so we could easily open it if we were running an intense game or stress test?
Also, I don't know if this has been brought up but are we able to replace the fan in the PSU for a mini noctua fan?
 
Last edited:

Wenemun

Caliper Novice
Mar 7, 2018
27
31
Hello,

I was wondering if it's possible for you to hinge the glass panel like a door so we could easily open it if we were running an intense game or stress test?
Also, I don't know if this has been brought up but are we able to replace the fan in the PSU for a mini noctua fan?

Those sounds like super easy mods. Good ideas!
Something like this would work, but would mean drilling into the case.


It would be great to have a servo or something to move it as well, based on the temperature. Or instead of hinging it, it could just raise and lower the glass. (I plan to have mine horizontal, so keeping a flat top would be good)

With the fan, I've seen this done on the custom flex atx psus from geeekstore. Shouldnt be hard if opening a PSU doesnt phase you. Squirt it with some vht black vinyl dye for the aesthetics.
 
Last edited:

britsches

Chassis Packer
May 17, 2019
20
5
Those sounds like super easy mods. Good ideas!
Something like this would work, but would mean drilling into the case.


It would be great to have a servo or something to move it as well, based on the temperature. Or instead of hinging it, it could just raise and lower the glass. (I plan to have mine horizontal, so keeping a flat top would be good)

With the fan, I've seen this done on the custom flex atx psus from geeekstore. Shouldnt be hard if opening a PSU doesnt phase you. Squirt it with some vht black vinyl dye for the aesthetics.
The geekstore PSU has a thinner fan than noctua i think, but i might be wrong.
 

Analogue Blacksheep

King of Cable Management
Dec 2, 2018
831
688
Purchase period will end on mid August, I'll have to confirm the exact day.

Just a heads up: we probably won't make a new batch of the P50 soon.
So this is the last chance to get the case, it will be a very limited run.

I'm assuming the PSU would also be no longer for sale around mid August as well?
 

x111

SFF Lingo Aficionado
Aug 5, 2019
114
45
BernardoZ,
is it there any option to get perforated aluminium panel instead of heavy useless glass ?
 
Last edited:

BernardoZ

Founder of Z-CASES
Original poster
z-cases.com
Feb 7, 2018
264
490
www.z-cases.com
Last chance to purchase the PSU separately!
All separate PSU orders until August 14 23:59 EST will be shipped in the 1st batch (end of this month).
Orders after that will be shipped only in the 2nd batch (probably in November).
The reason is that we need some extra PSUs to bundle with the remaining cases.

About the cases, we still have a few left from 1st batch, so you can order it until we start shipping.
Buy here
 
  • Like
Reactions: Analogue Blacksheep

Instran0

Master of Cramming
May 31, 2017
526
107
Last chance to purchase the PSU separately!
All separate PSU orders until August 14 23:59 EST will be shipped in the 1st batch (end of this month).
Orders after that will be shipped only in the 2nd batch (probably in November).
The reason is that we need some extra PSUs to bundle with the remaining cases.

About the cases, we still have a few left from 1st batch, so you can order it until we start shipping.
Buy here


ends august 14th ?

also, how do i buy the angled power cable, that goes with your PSU ?
 

Instran0

Master of Cramming
May 31, 2017
526
107
Do you mean the C13 plug extender? If yes, it comes included with all our cases, but not with the separate PSU orders.


can you include that C13 extender cable, if i do a large PSU order ??

i'm not buying a case yet, & am willing to negotiate.
 
Status
Not open for further replies.