My main points with the sentry 1 after running it for years now.
1 - Hole pattern should match screw holes to mount a fan or other devices (either on the inside or the outside)
2 - Too many screws, try to remove screws as much as possible and use another locking mechanism. Make GPU and CPU slots easier to access.
3 - Front Port should be designed in a way that allows people to install their cable of choice (USB type A or USB type C or other). Instead of just USB type A.
4 - Display mount hook. Ideally, there would be a slim whole/slot on the top CPU side to allow for a bracket to hold/mount a monitor or tablet.
5 - Add a bigger hole above or around Motherboard shield compartment to wire cables through. Example uses: External Fan, Asrock side panel kit plug.
6 - Material on sentry scratches far too easily. I don't know what the solution could be but my case has so many scratches from transporting it that it might as well have a scratch pattern instead of a solid color.
I really crammed a ton of stuff into this case. Soon will have a 3090 in it hopefully. I couldn't find a 4070ti/4080 that would fit. The Inno I would have to import or pay too much for it.
