Normal
We plan to fit two of those, you could try to fit a third one on top of the drive that is in place of GPU, but that would depend on the drive's thickness - you need to fit under the main rail (the one holding 2.5" drives and riser's pci-e slot) within 50 mm, that's the same restriction as for total height of AIO with fan.The reason for that is the GPU side perforation is shifted inward and because of that spot for the mounting the 3.5" is under the main rail. We are also not going to provide brackets for stacking anymore so you'd have to figure out your own solution for this to put one drive above the other.For a fourth one, it would be really hard to fit as the one in the front is going through the hole in central wall and that's going to be significantly smaller than those 50 mm.
We plan to fit two of those, you could try to fit a third one on top of the drive that is in place of GPU, but that would depend on the drive's thickness - you need to fit under the main rail (the one holding 2.5" drives and riser's pci-e slot) within 50 mm, that's the same restriction as for total height of AIO with fan.
The reason for that is the GPU side perforation is shifted inward and because of that spot for the mounting the 3.5" is under the main rail.
We are also not going to provide brackets for stacking anymore so you'd have to figure out your own solution for this to put one drive above the other.
For a fourth one, it would be really hard to fit as the one in the front is going through the hole in central wall and that's going to be significantly smaller than those 50 mm.
