Normal
That makes sense. Havent had any instability running it at 85-90c for extended periods, so il take AMDs word that its normal. Hopefully a 3d printed duct should drop temps 5c or so just to get it in a more comfortable range.On another note, im running a 50mm thick 980ti in the sentry at the moment. temps are ok, about 80c at full load, but predictably its quite noisy, id say my tolerance is fans on 65%.Im looking at a 6800/6800xt, im wondering, even though the 6800 is a 2 slot, and so its quieter because there is more room between the fans and the perforations, it runs about 5-8c hotter than the 6800xt as the cooler is physically smaller, which means it will need to spin the fans faster to hold the same temp as the 6800xt. So what im asking is which do people think will be louder during gaming?
That makes sense. Havent had any instability running it at 85-90c for extended periods, so il take AMDs word that its normal. Hopefully a 3d printed duct should drop temps 5c or so just to get it in a more comfortable range.
On another note, im running a 50mm thick 980ti in the sentry at the moment. temps are ok, about 80c at full load, but predictably its quite noisy, id say my tolerance is fans on 65%.
Im looking at a 6800/6800xt, im wondering, even though the 6800 is a 2 slot, and so its quieter because there is more room between the fans and the perforations, it runs about 5-8c hotter than the 6800xt as the cooler is physically smaller, which means it will need to spin the fans faster to hold the same temp as the 6800xt. So what im asking is which do people think will be louder during gaming?
