Selecting aircooler for Louqe Ghost S1

[Diegolrod]

Hi,

I built a Louqe Ghost S1 with the next specs:

Ryzen 5 3600
Aorus X570I Pro Wifi
RTX 2070 super
Samsung Evo 970
Corsair vengeance 16GB
EVGA 650W

I chose a NH-L12s, however it didn't fit even though I bent it a bit and it was because of the motherboard.
So I will like to ask you all if you recommend me a good aircooler that could fit with this configuration and give good temperature with acceptable noise levels.

Thank you very much

 

[neiru37]

Yeah I'm pretty sure you're not bending it enough. Also try rotating the orientation as well as moving the fan outwards towards the opening of the C so that you can bend it some more without the middle part of the C hitting the fan. At first mine didn't fit as well when I had the opening of the C pointed up, but when I rotated it so that the opening of the C was pointing towards the PSU, then bending it some more to the point that the mounting screws didn't align up with the holes in the fin stack, I was able to fit it like a glove.