Normal
at current shipping rates it doesn't make much sense to offer the backplate for the community so I'd suggest to get one made locally as [USER=75]@Runamok81[/USER] did.The laser cutting drawings are attached to this post (material: 1.5mm AlMg3).important: the mounting holes are designed for M3 PEM press inserts to offset the backplate by about 3mm and prevent it from touching any components on the PCB . But I think you can also use some washers and/or nuts and bolts.
at current shipping rates it doesn't make much sense to offer the backplate for the community so I'd suggest to get one made locally as [USER=75]@Runamok81[/USER] did.
The laser cutting drawings are attached to this post (material: 1.5mm AlMg3).
important: the mounting holes are designed for M3 PEM press inserts to offset the backplate by about 3mm and prevent it from touching any components on the PCB . But I think you can also use some washers and/or nuts and bolts.
