Reply to thread

Message

[ATTACH=full]2578[/ATTACH]

The MIT-EVO is based on the N0RDR1 design and features the classic layout of my MIT1 ITX Tower...
Case Volume: ca. 9L
Material: Steel & real wood
Cooler: Thermalright SS135
PSU: SFX / SFX-L
GPU: ITX size
Front Fans: 2x 120mm, max. 25mm (Arctic Slim recommended, for easier cable management)
Rear Fans: 2x 80mm or 1x 92mm
Bottom Fan: 1x 120mm slim with 1-slot GPU / de-shroud
The design is open source / free-to-use for personal projects and the drawings are attached here to this post... enjoy!

<blockquote data-quote="REVOCCASES" data-source="post: 277477" data-attributes="member: 18145">[ATTACH=full]2578[/ATTACH]The MIT-EVO is based on the <a href="https://smallformfactor.net/forum/threads/n0rdr1-a-custom-cool-quiet-sff-tower-with-wood-front-panel.18206/">N0RDR1 </a>design and features the classic layout of my <a href="https://smallformfactor.net/forum/threads/revoccases-rcc-mit1-mini-itx-tower-case-classic-layout-minimalistic-design.16944/">MIT1 ITX Tower</a>...<ul>
<li data-xf-list-type="ul">Case Volume: ca. 9L</li>
<li data-xf-list-type="ul">Material: Steel &amp; real wood</li>
<li data-xf-list-type="ul">Cooler: Thermalright SS135</li>
<li data-xf-list-type="ul">PSU: SFX / SFX-L</li>
<li data-xf-list-type="ul">GPU: ITX size</li>
<li data-xf-list-type="ul">Front Fans: 2x 120mm, max. 25mm (Arctic Slim recommended, for easier cable management)</li>
<li data-xf-list-type="ul">Rear Fans: 2x 80mm or 1x 92mm</li>
<li data-xf-list-type="ul">Bottom Fan: 1x 120mm slim with 1-slot GPU / de-shroud</li>
</ul>The design is open source / free-to-use for personal projects and the drawings are attached here to this post... enjoy!</blockquote>

[QUOTE="REVOCCASES, post: 277477, member: 18145"] [ATTACH type="full" width="520px"]2578[/ATTACH] The [B]MIT-EVO[/B] is based on the [URL='https://smallformfactor.net/forum/threads/n0rdr1-a-custom-cool-quiet-sff-tower-with-wood-front-panel.18206/']N0RDR1 [/URL]design and features the classic layout of my [URL='https://smallformfactor.net/forum/threads/revoccases-rcc-mit1-mini-itx-tower-case-classic-layout-minimalistic-design.16944/']MIT1 ITX Tower[/URL]... [LIST] [*]Case Volume: ca. 9L [*]Material: Steel & real wood [*]Cooler: Thermalright SS135 [*]PSU: SFX / SFX-L [*]GPU: ITX size [*]Front Fans: 2x 120mm, max. 25mm (Arctic Slim recommended, for easier cable management) [*]Rear Fans: 2x 80mm or 1x 92mm [*]Bottom Fan: 1x 120mm slim with 1-slot GPU / de-shroud [/LIST] The design is open source / free-to-use for personal projects and the drawings are attached here to this post... enjoy! [/QUOTE]

Verification