Reply to thread

Hello,


I have a Radeon R9 fury x that I am looking to mod, I would like to remove the native water cooler/radiator, and install an air cooler.. unfortunately, there seem to be no aftermarket air coolers for this specific GPU.


I would like to limit the fan to 90 mm. I have never fabricated my own heatsink before, so I am not really sure how to go about this... The VRM modules surrounding the GPU do not need to be cooled, as they are not being actively cooled with the current cooling solution. I would like the fan to be nearly flush with the top of the shroud so air could be easily funneled through the GPU; I would cut a square or circle into the shroud so the fan would have access to open air within the case.


Thank you in advance for any help, it is much appreciated!