Prototype case R-Cube 13L by Custom_MOD

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,130
2,023
www.custom-mod.com
This R-Cube 12.7L is a small case for a high -performance gaming PC. Despite the small volume in it, you can assemble a fairly powerful PC with a powerful cooling system. Easy enough assembly due to simple design. The case has several Display Port connectors with an internal cable for connecting a video card.

A two-slot video card up to 275mm long can be installed in the case. There is a cage for a 3.5 "HDD. For CPU cooling, you can install a Large Tower Cooler or a single-section AIO.

  • Volume: 12.7L (302mm x 227mm x 185mm)
  • Material: steel (1mm); aluminum (1,5mm)
    Vertical installation of the motherboard:
  • MB: mini ITX; mini-DTX (170x215mm)
  • Cooler: up to 155mm
  • GPU: <275mm, <135*mm, <55mm
  • Fan: 1 x 92x92x25mm
    Horizontal installation of the motherboard:
  • MB: mini-ITX (170x170mm)
  • Cooler: высотой до 170mm/
    AIO: Radiator max 125x125mm + 2fan 120x25mm
  • PCIe riser: LiHeat 300mm type.B
  • GPU: <275mm, <130*mm, <44mm
    _______________
  • PSU: SFX / SFX-L
  • Storage: SSD/HDD: 2 x 2.5" / HDD 3.5"
  • 22mm for connectors inside the case
    * Front ports 2xUSB 3.0 + audio / mic reduce the permissible distance across the width of installed video cards by 15mm

 
Last edited:

jkiejr

Average Stuffer
Jan 26, 2018
82
31
That is incredible, its perfect. It is everything i am looking for in a case. Are you using acrylic on the front and top.
 

penghutw

Trash Compacter
Nov 23, 2018
42
24
I'm confused. How are you going to jank connect the GPU to the PCIe slot on the motherboard?

Bendy risers don't seem like a good idea.
 

jkiejr

Average Stuffer
Jan 26, 2018
82
31
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.
 

penghutw

Trash Compacter
Nov 23, 2018
42
24
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.

No those are normal risers. What I meant was the riser will clearly have to be folded at a 90 degree angle.

I've since then found that it is possible to do riser origami, but I'm not sure how I feel about that.
 

loader963

King of Cable Management
Jan 21, 2017
660
568
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.
 

CC Ricers

Shrink Ray Wielder
Bronze Supporter
Nov 1, 2015
2,233
2,556
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.

I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.
 
  • Like
Reactions: loader963

loader963

King of Cable Management
Jan 21, 2017
660
568
I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.

Was assuming the lack of holes on top was due to it being a render. But this could be it too.
 

HeroXLazer

King of Cable Management
Sep 11, 2016
707
476
@sergiiua Do you have any updates? Also, would you be able to make the display connectors modular, so for example, I could have one HDMI, and one DisplayPort?
 

AllXFrag

SFF Lingo Aficionado
Feb 23, 2020
96
135
I'd be very much interested in this form factor myself. Would you consider sparing some room for those 3 slot gpu's on the market?