• Over the next few days, SFF.N will be performing maintenance on the website, some of which may result in periodic downtime. During these periods, users will be unable to log in or access the site. We apologize for any inconvenience and appreciate your patience.

Prototype R-Cube 13L

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,039
1,868
www.custmod.com

The R-Cube 13L is a small enclosure for a productive gaming PC. Despite the small volume in it, you can assemble a fairly powerful PC with a powerful cooling system. Easy assembly due to simple construction. The housing has several Display Port connectors with an internal cable for connecting a video card.

Specification
  • Volume: 12.7L (302mm x 227mm x 185mm)
  • Material: steel (1mm); aluminum (1,5mm)
    Vertical installation of the motherboard:
  • MB: mini ITX; mini-DTX (170x215mm)
  • Cooler: up to 155mm
  • GPU: <275mm, <135*mm, <55mm
  • Fan: 1 x 92x92x25mm
    Horizontal installation of the motherboard:
  • MB: mini-ITX (170x170mm)
  • Cooler: высотой до 170mm/
    AIO: Radiator max 125x125mm + 2fan 120x25mm
  • PCIe riser: LiHeat 300mm type.B
  • GPU: <275mm, <130*mm, <44mm
    _______________
  • PSU: SFX / SFX-L
  • Storage: SSD/HDD: 2 x 2.5" / HDD 3.5"
  • 22mm for connectors inside the case
    * Front ports 2xUSB 3.0 + audio / mic reduce the permissible distance across the width of installed video cards by 15mm

 
Last edited:

jkiejr

Average Stuffer
Jan 26, 2018
81
31
That is incredible, its perfect. It is everything i am looking for in a case. Are you using acrylic on the front and top.
 

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,039
1,868
www.custmod.com
That is incredible, its perfect. It is everything i am looking for in a case. Are you using acrylic on the front and top.
yes it will be a one-piece acrylic lid on magnets. will close before and top.

an aluminum cover will also be available.
 
  • Like
Reactions: Bjornyyy

penghutw

Trash Compacter
Nov 23, 2018
42
24
I'm confused. How are you going to jank connect the GPU to the PCIe slot on the motherboard?

Bendy risers don't seem like a good idea.
 

jkiejr

Average Stuffer
Jan 26, 2018
81
31
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.
 

penghutw

Trash Compacter
Nov 23, 2018
42
24
bendy risers are used in just above every sandwich case out there, the dan, the sm5x series, etc.
No those are normal risers. What I meant was the riser will clearly have to be folded at a 90 degree angle.

I've since then found that it is possible to do riser origami, but I'm not sure how I feel about that.
 

loader963

King of Cable Management
Bronze Supporter
Jan 21, 2017
639
542
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.
 

CC Ricers

Shrink Way Wielder
Bronze Supporter
Nov 1, 2015
1,995
2,154
Like everything except where the hdmi/displayport cables are gonna come out of the front of the top of the case.
I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.
 
  • Like
Reactions: loader963

loader963

King of Cable Management
Bronze Supporter
Jan 21, 2017
639
542
I actually see no way on the top for the cables to come out. They probably will pass through with an extension using three holes on the back, right above the motherboard I/O.
Was assuming the lack of holes on top was due to it being a render. But this could be it too.
 

HeroXLazer

King of Cable Management
Sep 11, 2016
708
476
@sergiiua Do you have any updates? Also, would you be able to make the display connectors modular, so for example, I could have one HDMI, and one DisplayPort?
 

AllXFrag

SFF Lingo Aficionado
Feb 23, 2020
92
134
I'd be very much interested in this form factor myself. Would you consider sparing some room for those 3 slot gpu's on the market?