Normal
Sorry for not updating this. I ended up taking the heat sink off the RAM and cutting out a square piece of about 1x1cm so that the Apogee outlet could clear the memory without pressing against it. In the end however I have ended up not using the Gskill memory since it wouldn’t run at anything other than the JEDEC timings which are rubbish.I’m currently in the process of rebuilding the whole system anyway, and I will wither go with a 240 AIO for the cpu and leave the GPU on air, or make a custom 2x240mm rad loop for both GPU and CPU using the Barrow cpu/pump block instead (￡74.09 10％ Off | Barrow POM Custom Computer Liquid Loop Kit INTEL/AMD/X99/X299 water block integrated pump and reservoir LTPRP-04[URL unfurl="true"]https://a.aliexpress.com/_mMttVfr[/URL])
Sorry for not updating this. I ended up taking the heat sink off the RAM and cutting out a square piece of about 1x1cm so that the Apogee outlet could clear the memory without pressing against it. In the end however I have ended up not using the Gskill memory since it wouldn’t run at anything other than the JEDEC timings which are rubbish.
I’m currently in the process of rebuilding the whole system anyway, and I will wither go with a 240 AIO for the cpu and leave the GPU on air, or make a custom 2x240mm rad loop for both GPU and CPU using the Barrow cpu/pump block instead (
￡74.09 10％ Off | Barrow POM Custom Computer Liquid Loop Kit INTEL/AMD/X99/X299 water block integrated pump and reservoir LTPRP-04
[URL unfurl="true"]https://a.aliexpress.com/_mMttVfr[/URL])
