Normal
The EK 120 didn’t fit between the two corner frames, but it fits between the glass. It was about 2-3 mm too tight between the corner frames. I might be able to get the rad to fit by removing the radiator shroud that surrounds the SE. the shroud is simply screwed together instead of welded. The shroud has the 120mm fan / rad mounting holes though, so removing the shroud makes it a little bit more tricky to mount the rad.Regarding the reservoir, I filled and removed all air bubbles before disconnecting the reservoir. [spoiler= Here’s a picture:] [/spoiler]
The EK 120 didn’t fit between the two corner frames, but it fits between the glass. It was about 2-3 mm too tight between the corner frames. I might be able to get the rad to fit by removing the radiator shroud that surrounds the SE. the shroud is simply screwed together instead of welded. The shroud has the 120mm fan / rad mounting holes though, so removing the shroud makes it a little bit more tricky to mount the rad.
Regarding the reservoir, I filled and removed all air bubbles before disconnecting the reservoir. [spoiler= Here’s a picture:]
[/spoiler]
