Discussion NR200p MAX internal measurements

3rotor

Chassis Packer
Original poster
Aug 28, 2019
15
4
Hi All,

been in the sff space for years and looking to do another project for a friend of mine, have suggested the mighty nr200 max because of whats included in the box and room for expansion

Is anyone able to assist me with some measurements, he wants to mount a pair of 140/160mm fans on the inside and do a de-shroud mod on a 2 slot card vertically, as the pc will live in a cupboard. From what i can see online it will need some drilling and a few cuts/mods to make it work. Just want to check my math before i order it for him.

A: Clearance from a two slot to the internal edge of the frame

B: Clearance from bottom of fan grill (aio rad) to the lip of the frame

C: Clearance inside to inside

D: Clearance inside edge to inside edge

shown in yellow





photos from kit guru
 

hrh_ginsterbusch

King of Cable Management
Silver Supporter
Nov 18, 2021
650
244
wp-devil.com
Just on a side note: If all fails, the SAMA IM01 (or any decent variation) is another option. A Liquid Freezer II does not fit, but just about anything else.