Normal
Hi there iFreilicht .. you make some good point and lets go through some of them. There are existing patents on a computer but this is not a computer but rather a case. the design is nothing new as we see many accessories in a similar shape and size, rice cookers, rubbish bins, etc. Also other manufactures have created computers in a round shape in the past. you can google them and see they existed well before 2013. the inside of the case was built from the ground up and i have invested many hours designing this.the installation is probably the easiest in comparison to anything in its size. the GPU is clearly visible and can be easily mounted and removed. Same with the motherboard. the psu does requires some screwing to access it. But overall the cables are managed nice and easily in between the motherboard and GPU door. The door design is like no other and is unique. You simply open the door and the HDD and cables are all managed there. also keep in mind that cables with this case are custom made so that you dont have excess or too little. when this is compared to other builds on the market, the ram, gpu, ssd are easy to be mounted and remove. This is no different. When trying to remove the psu just like in other builds it get more difficul because you are limited to space. its the same here.regarding the fan, this design has a mesh on top with holes for ventilation. inside that vent is a 140mm fan that mounts perfectly on the chassis. the mesh sits on top of the fan and the fan is not visable from top.. well not fully visable.you make some good observations and I appreciate your comments. it really gets people to think about it. overall with a small form factor build and using standard parts I can say that this is not that difficult to put together. it has been organised in a way to look good when you take the lid off and easily access parts to mount on and off. many parts like cables have been custom made to optimism space. considering with what the market offer in standards and for us not to alter and change the standard but work with whats out there, i think we did the best job we could in design.
Hi there iFreilicht .. you make some good point and lets go through some of them. There are existing patents on a computer but this is not a computer but rather a case. the design is nothing new as we see many accessories in a similar shape and size, rice cookers, rubbish bins, etc. Also other manufactures have created computers in a round shape in the past. you can google them and see they existed well before 2013. the inside of the case was built from the ground up and i have invested many hours designing this.
the installation is probably the easiest in comparison to anything in its size. the GPU is clearly visible and can be easily mounted and removed. Same with the motherboard. the psu does requires some screwing to access it. But overall the cables are managed nice and easily in between the motherboard and GPU door. The door design is like no other and is unique. You simply open the door and the HDD and cables are all managed there. also keep in mind that cables with this case are custom made so that you dont have excess or too little. when this is compared to other builds on the market, the ram, gpu, ssd are easy to be mounted and remove. This is no different. When trying to remove the psu just like in other builds it get more difficul because you are limited to space. its the same here.
regarding the fan, this design has a mesh on top with holes for ventilation. inside that vent is a 140mm fan that mounts perfectly on the chassis. the mesh sits on top of the fan and the fan is not visable from top.. well not fully visable.
you make some good observations and I appreciate your comments. it really gets people to think about it. overall with a small form factor build and using standard parts I can say that this is not that difficult to put together. it has been organised in a way to look good when you take the lid off and easily access parts to mount on and off. many parts like cables have been custom made to optimism space. considering with what the market offer in standards and for us not to alter and change the standard but work with whats out there, i think we did the best job we could in design.
