Normal
At the moment the design can only fit a 120mm side fan, this is because the chamfered edges reduce the internal clearance height along the side.But I would like support for 140mm fans, so I will see what I can do, it may mean that a flat section needs adding along the bottom edge.If support for 140mm is added, then yes it would also support 120mm fans. I am thinking the side fan area will be covered by a 140mm dust filter meaning smaller fans won't look odd with big gaps around them.There is also the dilemma that do I add an extra 10mm to the width to support full 25mm thick fans? or stick to the current space saving design that supports up to 15mm thick fans? The extra 10mm case width would add 0.3litres to the volume.
At the moment the design can only fit a 120mm side fan, this is because the chamfered edges reduce the internal clearance height along the side.
But I would like support for 140mm fans, so I will see what I can do, it may mean that a flat section needs adding along the bottom edge.
If support for 140mm is added, then yes it would also support 120mm fans. I am thinking the side fan area will be covered by a 140mm dust filter meaning smaller fans won't look odd with big gaps around them.
There is also the dilemma that do I add an extra 10mm to the width to support full 25mm thick fans? or stick to the current space saving design that supports up to 15mm thick fans? The extra 10mm case width would add 0.3litres to the volume.
