Hey Togan,
First of all, Yes the current file naming sceme is a mess.
I will go through the file choosing with your system as an example:
Required Prints Checklist:
☐ Front panel
☐ Front Barebone + Riser
☐ Mid GXX
☐ Backplate GXX
☐ 2x Main Beams
Cosmetics:
☐ Grills
☐ Sidepanels
☐ Feet
☐ Hats
1. Riser
Do you have an angled or reversed pcie riser?
If you don’t have one yet I would go for the ssupd 185mm dual reverse riser.
Reverse Riser + Front Barebone.stl
Note: the Power-Button is one-size only: 19mm threading
added additional button sizes 12 16 19 22mm diameter
2. GPU Thickness
The GXX stands for your GPU thickness. And you should orient your Mid and Backplate print on your GPU thickness.
MSI Gaming X GTX 1660 has a thickness of 46mm, which leaves us with the G59 option
Or u go without sidepanels with G44 for the x-posed look
Mid G59 C49.stl
Backplate G59 C49.stl
3. AIO height
The Main Beam part has two variants: 20 & 25 mm.
They stand for the included height-space for Fan or Rads.
Expansion modules are sized from 5-50mm and stackable on each other. K1 starts with 20mm headspace, while the 20mm footspace should be reserved for cable organization.
If u need more height, you have to add a Hat matching to your needs:
In your case:
Top Rad + Fan = 57mm (doublechecked on Caseking.de)
Bottom Fan + Cable space = 30mm + 20mm
2x Main Beam with 25mm Rad-Fan space.stl
35mm Hat.stl Top
25mm Hat.stl Bottom
4. The Rest
Front Panel.stl
feet.stl
Grill 1.stl, Grill 2.stl, Grill 1 feet.stl, Grill 2 feet.stl
Sidepanels two of each size
5. Inserts Required!
I know that inserts are such a hassle to push into the prints,
But I see it as an effort that pays you back in reusability of the parts.
The prints without the Inserts Required Tag are doing just fine, if u want it quick and easy.
But be warned that without Inserts the printed parts will be fragile and will be affected by wear & tear.
I Hope this will be helpful for you, I am here to help for any further questions.
