Reply to thread

Message

&

Thank you for your Feedback and Insight!
I will change it to a parts-differentiated material recommendation:

[MEDIA=googledrive]1zifxbqf7StEeQTyf_MMbqFvGi-thQHdS[/MEDIA]

RED Spine-parts are recommended to be printed with ABS, ASA, PETG or other thermal resistant materials
WHITE Shell-parts have no material-restrictions

More about the print:

[MEDIA=googledrive]1UamHwYv_XUrw1TQ7dGMUhYfnjscmgubA[/MEDIA]

Base configuration 89h + 2x 20mm Module 32h = 121h

[MEDIA=googledrive]1socry8RbIjxxY3th5AJY_3xG4RXFV1DR[/MEDIA]

Printing-time with the following settings:
Layer height: 0.2mm
Wall thickness: 1.2mm
Top&Bottom thickness: 1mm
Infill: 30%
Printing speed: 50mm/s

<blockquote data-quote="Kiborato" data-source="post: 253707" data-attributes="member: 26600">&amp;Thank you for your Feedback and Insight! <img class="smilie smilie--emoji" loading="lazy" alt="😀" title="Grinning face&nbsp; &nbsp; :grinning:" src="https://cdn.jsdelivr.net/joypixels/assets/6.0/png/unicode/64/1f600.png" data-shortname=":grinning:" />I will change it to a parts-differentiated material recommendation:[MEDIA=googledrive]1zifxbqf7StEeQTyf_MMbqFvGi-thQHdS[/MEDIA]RED Spine-parts are recommended to be printed with ABS, ASA, PETG or other thermal resistant materialsWHITE Shell-parts have no material-restrictions<h3>More about the print:</h3>[MEDIA=googledrive]1UamHwYv_XUrw1TQ7dGMUhYfnjscmgubA[/MEDIA]<h4>Base configuration 89h + 2x 20mm Module 32h = 121h</h4>[MEDIA=googledrive]1socry8RbIjxxY3th5AJY_3xG4RXFV1DR[/MEDIA]Printing-time with the following settings:Layer height: 0.2mmWall thickness: 1.2mmTop&amp;Bottom thickness: 1mmInfill: 30%Printing speed: 50mm/s</blockquote>

[QUOTE="Kiborato, post: 253707, member: 26600"] & Thank you for your Feedback and Insight! 😀 I will change it to a parts-differentiated material recommendation: [MEDIA=googledrive]1zifxbqf7StEeQTyf_MMbqFvGi-thQHdS[/MEDIA] [COLOR=rgb(226, 80, 65)][B]RED[/B][/COLOR] Spine-parts are recommended to be printed with ABS, ASA, PETG or other thermal resistant materials [B][COLOR=rgb(255, 255, 255)]WHITE[/COLOR][/B] Shell-parts have no material-restrictions [HEADING=2]More about the print:[/HEADING] [MEDIA=googledrive]1UamHwYv_XUrw1TQ7dGMUhYfnjscmgubA[/MEDIA] [HEADING=3]Base configuration 89h + 2x 20mm Module 32h = 121h[/HEADING] [MEDIA=googledrive]1socry8RbIjxxY3th5AJY_3xG4RXFV1DR[/MEDIA] Printing-time with the following settings: Layer height: 0.2mm Wall thickness: 1.2mm Top&Bottom thickness: 1mm Infill: 30% Printing speed: 50mm/s [/QUOTE]

Verification