K1 Current Partlist (2. Iteration)
Here is the part-list u will need for the present iteration:
Pricerange: cheapest / pro
- 1kg Filament of your choice (35% infill) 15€ 50€
- plastic glue 50ct 2€
- vandal switch 19mm 2€ 10€
- C13 to C14 90° extension cable 25/30 cm 2€ 15€
- Assortment of Countersunk-screws: 50 M3x20, 50 M3x10, 50 M3x6 5€ 10€
- Panhead-Screw: 4 M3x5 (for Motherboard)
optional:
- Countersunk-screws for 25mm Fan: 20 M3x30
- acrylic or polycarbonate panels: 2x 300x200x3mm 5€ 30€
- for magnetic panel mounting: 4€ 30€
- 1.2m 1cm wide nickel or steel strip(sold for battery welding)
- 1.2m 1cm wide double sided tape
- 24 magnets(my choice of magnet size: d=6mm h=3mm)
- EZDIY-FAB Riser vertical mount (I love the RGB part) 40$/€
My shopping cart summary incl. shipping: ~50€
My current 3D-Printer: Ender 3 v2 200€
Estimated printing time: 15-120 hours (quality takes time!)
The pricetag I would put onto this Case fully assembled would be at least 120€, counting in print time and labor cost.
You can contact me privately if you are interested.
This is why I was thinking of only putting together hardware-kits at ~50€(+shipping),
containing screws, acrylic sidepanels, magnets and print of instructions.
[MEDIA=googledrive]196yllW0REAHcRyDSVaCtxR4kK09XXRZC[/MEDIA]
K1 Prototype
For more renders like the post! 
Next Update: K1 1. Prototype & Design Revision
