Normal
Good progress there! Keep in mind that wood is a bad heat conductor, so hot air that is trapped inside can't dissipate its heat through the panels. An Aluminium version of this case might give you slightly better temps.I can't recommend the SST-AR04. It seems to disregard some of the component height restrictions around the CPU socket, on the ASUS Q87T I tested it on, it only fit in one orientation, but blocked four of the five internal USB2 headers. Not as relevant for your case as it was for my application, but on other boards, it might not fit at all.
Good progress there! Keep in mind that wood is a bad heat conductor, so hot air that is trapped inside can't dissipate its heat through the panels. An Aluminium version of this case might give you slightly better temps.
I can't recommend the SST-AR04. It seems to disregard some of the component height restrictions around the CPU socket, on the ASUS Q87T I tested it on, it only fit in one orientation, but blocked four of the five internal USB2 headers. Not as relevant for your case as it was for my application, but on other boards, it might not fit at all.
