Normal
the front should fit (since the fan in ATX PSUs are usually 120mm and the actual width isn't too far off 140mm). as for the rear beside the motherboard... i think it might completely obstruct the IO and audio headers belowthe only reason why i'm not too hot on using ATX at the front is because the PSU choices out there are usually of lengths longer than the standard ATX outline, which means the case might end up with barely enough space for one 120mm (less so for a few reaaaaally long ones) Silverstone are probably the visible few that made a kilowatt PSU that sticks with the ATX specification dimensionsEDIT: i haven't thought about rotating the PSU sideways though, but i think that might affect exhaust for the PSU itself since it'll be facing the case wall in either horizontal orientation
the front should fit (since the fan in ATX PSUs are usually 120mm and the actual width isn't too far off 140mm). as for the rear beside the motherboard... i think it might completely obstruct the IO and audio headers below
the only reason why i'm not too hot on using ATX at the front is because the PSU choices out there are usually of lengths longer than the standard ATX outline, which means the case might end up with barely enough space for one 120mm (less so for a few reaaaaally long ones) Silverstone are probably the visible few that made a kilowatt PSU that sticks with the ATX specification dimensions
EDIT: i haven't thought about rotating the PSU sideways though, but i think that might affect exhaust for the PSU itself since it'll be facing the case wall in either horizontal orientation
