[MEDIA=imgur]a/5HUEF7O[/MEDIA]
[MEDIA=imgur]H4XBO7q[/MEDIA]
[MEDIA=imgur]BNiyzjW[/MEDIA]
Status: BETA
Cpu cooler height: 50mm (+1mm for cleareance)
Pci-e card size: 127~135, 305, 3-slot + 9mm (height, length, thickness)
Power supply: sfx & sfx-l, with ventilation holes on both sides, in case you want to flip it around.
Storage: 2 * 2.5" (Only with sfx power supply. Also in further revision I can probably add 3++ more 2.5" & a couple of 3.5" mounts)
Cooling: 2 * 120x120x15 fans (If the last pci-e slot is unpopulated)
Riser configurations:
-10cm 90 degree: 2-slot gpu
-10cm 270 degree: 2-slot / 3-slot gpu
-10cm 90 degree + 1U riser (20.32mm) + peine braun bifurcation riser x8x8 left turn 1 slot distance: 2-slot gpu + 1-slot pcie.
In theory you could even create a custom x4x4x8 bifurcation riser, or use a sas 8i server one, but that's quite expensive.
Bom:
In thingiverse, because I don't want to update the thread every time something changes.
Also requires a 3d printer that can print at least 300, 308.5, 15mm (xyz).
When I finalize the design, I'll release it in thingiverse.
