Normal
There are several "rating agencies" and they propose different amp ratings for these connectors.IEC for example gives it a 2.5 Amp rating but North American rating agencies give it a 10 Amp rating. It also depends on the specific manufacturer and quality of the connectors and cables.Therefore I said if ZS is using a good brand, UL approved C6 it should be fine. If in doubt, someone with 110VAC should test it with some 850W build and measure the temp rise on the connector.[URL unfurl="true"]https://en.m.wikipedia.org/wiki/IEC_60320[/URL]
There are several "rating agencies" and they propose different amp ratings for these connectors.
IEC for example gives it a 2.5 Amp rating but North American rating agencies give it a 10 Amp rating. It also depends on the specific manufacturer and quality of the connectors and cables.
Therefore I said if ZS is using a good brand, UL approved C6 it should be fine. If in doubt, someone with 110VAC should test it with some 850W build and measure the temp rise on the connector.
[URL unfurl="true"]https://en.m.wikipedia.org/wiki/IEC_60320[/URL]
