Production FormD T1 Classic (READ FIRST POST)

Increase volume from 9.8L to 10.5L to support MSI Suprim X 30XX?

  • Yes, worth the trade off to be more compatible with components

    Votes: 116 24.7%
  • No, not worth it b/c it is not better than the ROG 30XX, which fits now at <10L

    Votes: 353 75.3%

  • Total voters
    469

Allhopeforhumanity

Master of Cramming
May 1, 2017
540
526
Bad news - on my way back from EU, Lufthansa may have lost my checked luggage = my components and prototype are gone.

They were suppose to find my luggage, it's been 48hours, chances of finding luggage after 48hours becomes slim.

I have the HWL LS120 and Koolance HX-CU420V radiator, but not much else.

FML

WTF man, that's horrible! Can you at the very least file a claim to get reimbursed for the value?
 

Brude27

Master of Cramming
Jun 21, 2018
384
878
Bad news - on my way back from EU, Lufthansa may have lost my checked luggage = my components and prototype are gone.

They were suppose to find my luggage, it's been 48hours, chances of finding luggage after 48hours becomes slim.

I have the HWL LS120 and Koolance HX-CU420V radiator, but not much else.

FML

Well... I tried to insert this, but it wouldn't work... the feeling remains the same.

https://media.giphy.com/media/BIN2S0sgQwdeE/giphy.gif
 

dlal1520

Average Stuffer
Dec 20, 2017
57
59
Bad news - on my way back from EU, Lufthansa may have lost my checked luggage = my components and prototype are gone.

They were suppose to find my luggage, it's been 48hours, chances of finding luggage after 48hours becomes slim.

I have the HWL LS120 and Koolance HX-CU420V radiator, but not much else.

FML

Damn, I hope they can reimburse you/ this doesn't put the whole project too far back. But that really sucks.
 

fabio

Shrink Ray Wielder
Apr 6, 2016
1,885
4,325
Bad news - on my way back from EU, Lufthansa may have lost my checked luggage = my components and prototype are gone.

They were suppose to find my luggage, it's been 48hours, chances of finding luggage after 48hours becomes slim.

I have the HWL LS120 and Koolance HX-CU420V radiator, but not much else.

FML
Hey man, did Lufthansa find your precious luggage?? I hope yes!! Eager to receive updates on this amazing case!
 

Wahaha360

a.k.a W360
Original poster
SFFLAB
NCASE
SSUPD
Feb 23, 2015
2,131
10,697
I found a USB-C hub on Taobao. Lazer3D and I have been exploring the variations of this hub for our projects.

There are 3 configuration of this hub that is interesting (all powered by the same chipset GL3520):
1. 2x USB-A 3.0 + 2x USB-C 3.0
2. 2x USB-A 3.0 + 1x USB-C 3.0 + 1x SD Card
3. 2x USB-A 3.0 + 1x USB-C 3.0 + 2x Audio Jack

These 3 I/O boards also happen to have the same screw hole mounting location, so in theory, if designed properly, customers can choose the I/O that best fit their needs.


* 2x USB-A 3.0 + 2x USB-C 3.0
* 2x USB-A 3.0 + 1x USB-C 3.0 + 1x SD Card


* 2x USB-A 3.0 + 1x USB-C 3.0 + 2x Audio Jack, curtesy of Lazer3D K888D


* All powered by the same chipset GL3520



If all goes well, this could be standard part across other projects on this forum.
 
Last edited:

SirJack

SFF Lingo Aficionado
Feb 22, 2018
95
59
I am wondering if a passive GPU cooling setup with the accelero or Morpheus will work? The internal free volume of the case is very small and should facilitate rapid air exchange. 2 25mm fans will direct air from the bottom, one through an 120 rad, to the top passing through a bare Morpheus heatsink .
 

PBJ

Airflow Optimizer
Jan 6, 2019
358
546
I found a USB-C hub on Taobao. Lazer3D and I have been exploring the variations of this hub for our projects.

There are 3 configuration of this hub that is interesting (all powered by the same chipset GL3520):
1. 2x USB-A 3.0 + 2x USB-C 3.0
2. 2x USB-A 3.0 + 1x USB-C 3.0 + 1x SD Card
3. 2x USB-A 3.0 + 1x USB-C 3.0 + 2x Audio Jack

These 3 I/O boards also happen to have the same screw hole mounting location, so in theory, if designed properly, customers can choose the I/O that best fit their needs.


* 2x USB-A 3.0 + 2x USB-C 3.0
* 2x USB-A 3.0 + 1x USB-C 3.0 + 1x SD Card


* 2x USB-A 3.0 + 1x USB-C 3.0 + 2x Audio Jack, curtesy of Lazer3D K888D


* All powered by the same chipset GL3520



If all goes well, this could be standard part across other projects on this forum.
Are those potential alternatives to the 2 USB-C+USB-C Style Power Button in the original design or are they meant to replace them?
 

Wahaha360

a.k.a W360
Original poster
SFFLAB
NCASE
SSUPD
Feb 23, 2015
2,131
10,697
Are those potential alternatives to the 2 USB-C+USB-C Style Power Button in the original design or are they meant to replace them?

The USB-C shaped Power Button Switch might not be tensioned enough to be satisfying. So I’m open to a new direction.

My gripe with the hub is the necessity of the SATA connector on the back for the current chipset.

I would prefer the entire hub power and data to be driven by a single connector, instead of multuple.

It’s not going to happen on the old USB3.0 20pin, so I’m thinking maybe USB 3.1 Gen 2 20pin Type-E
 
  • Like
Reactions: enricko7 and fabio

owliwar

Master of Cramming
Lazer3D
Apr 7, 2017
586
1,082
I'm keen on the usb c + card reader mostly because of aesthetics.
but really nice to see the progress overall, missed the last months of updates

hope you can find your bag
 
  • Like
Reactions: Arboreal