Production FormD T1 Classic (READ FIRST POST)

Increase volume from 9.8L to 10.5L to support MSI Suprim X 30XX?

  • Yes, worth the trade off to be more compatible with components

    Votes: 107 24.3%
  • No, not worth it b/c it is not better than the ROG 30XX, which fits now at <10L

    Votes: 334 75.7%

  • Total voters
    441

FischOderAal

Average Stuffer
Apr 15, 2020
70
73
From my understanding, if you were a part of the canceled november batch and have priority status, you need to take part in the IC if you want to get a case.
I'm currently in the Iran and cannot (easily) participate in the interest check (IP block due to sanctions). I am living in Germany and the case would be delivered to Germany. Or is it the same "interest check" from November 2021?
 
Last edited:

Navic

Master of Cramming
Jan 6, 2019
583
1,335
I'm currently in the Iran and cannot (easily) participate in the interest check (IP block due to sanctions). I am living in Germany and the case would be delivered to Germany. Or is it the same "interest check" from November 2021?
It's the same IC as the one back in November.
 
  • Like
Reactions: FischOderAal

LJS

Cable Smoosher
Feb 17, 2020
8
0
Is there any plans to sell and ship the reference layout to Asia?
As far as I know, there is only plan to sell sandwich layout in Asia.
 

FiftyFifty

Average Stuffer
May 20, 2021
63
113
 

hetvler

Cable-Tie Ninja
Aug 13, 2019
204
153
While we're here, i remember in the original case the alphcool LT240 AIO required modification for use in the case. Is that still the case in the 2.0 release? I bought the LT240 like 2 years ago at this point and am not sure if I still want to fiddle with modification.

Which AIOs, if any, are 3slot compatible with no modifications?
 

Navic

Master of Cramming
Jan 6, 2019
583
1,335
While we're here, i remember in the original case the alphcool LT240 AIO required modification for use in the case. Is that still the case in the 2.0 release? I bought the LT240 like 2 years ago at this point and am not sure if I still want to fiddle with modification.

Which AIOs, if any, are 3slot compatible with no modifications?
The main problem was the quick disconnects getting in the way and making it practically impossible to route the tubes. Some have made it work, but getting a different AIO is probably better.

Most AIOs will fit in 3 slot mode just fine. As long as the pump block is no taller than 50mm, it'll fit. I use the Corsair H100i Pro XT, but other AIOs such as the Phanteks Glacier One 240, EK AIO 240, Fractal Lumen S24, and more fit.
 

Tuscany

Cable-Tie Ninja
Apr 26, 2020
156
61
Are those who completed the interest check (aka got "Order #*****50 confirmed" email) be getting an E-Mail "hey, finalize your purchase" or we should proactively do the order?

One more thing - my main interest is the stock vertical option (with acc of course, but official one). However since these will likely be available later and also likely the price might be, well, higher, can we have some more info on the stand, so one can print in the meantime?
Is there actually any price expectations for the stand?
 
  • Like
Reactions: N9neBreak3r

hetvler

Cable-Tie Ninja
Aug 13, 2019
204
153
The main problem was the quick disconnects getting in the way and making it practically impossible to route the tubes. Some have made it work, but getting a different AIO is probably better.

Most AIOs will fit in 3 slot mode just fine. As long as the pump block is no taller than 50mm, it'll fit. I use the Corsair H100i Pro XT, but other AIOs such as the Phanteks Glacier One 240, EK AIO 240, Fractal Lumen S24, and more fit.
Thank you for all the help over the literal years of planning for this build :) I'll buy a second cooler to use if I can't get the alphacool to fit
 

PKAWA

Master of Cramming
May 27, 2020
487
488
Thank you for all the help over the literal years of planning for this build :) I'll buy a second cooler to use if I can't get the alphacool to fit
Just a fyi, mine started leaking and was unrepairable. Fortunately it did no damage to the rest of the computer which was shear luck since by the time I found out it was mostly empty. I'll never use another alphacool pump because I've heard too many stories about them leaking.
 

Navic

Master of Cramming
Jan 6, 2019
583
1,335
Are those who completed the interest check (aka got "Order #*****50 confirmed" email) be getting an E-Mail "hey, finalize your purchase" or we should proactively do the order?

One more thing - my main interest is the stock vertical option (with acc of course, but official one). However since these will likely be available later and also likely the price might be, well, higher, can we have some more info on the stand, so one can print in the meantime?
Is there actually any price expectations for the stand?
If you have completed the IC at all, then you will get the direct invoice sent to the email you used for the IC.

No info on the stand, other than it's going to come out with all other accessories (at least, that's the plan.)
 
  • Like
Reactions: N9neBreak3r

Kapsi

Trash Compacter
Nov 20, 2018
49
72
Any news regarding when the upgrade kit for reference to sandwich will be available? I never upgraded my IC to Sandwich so I will have to buy it later on.

I know there is no news but I was hoping the man himself could throw me a bone with that 🙈
 

hetvler

Cable-Tie Ninja
Aug 13, 2019
204
153
Just a fyi, mine started leaking and was unrepairable. Fortunately it did no damage to the rest of the computer which was shear luck since by the time I found out it was mostly empty. I'll never use another alphacool pump because I've heard too many stories about them leaking.
wow wild. havent heard that. maybe i'll just use the new one then.
 
  • Like
Reactions: PKAWA

hetvler

Cable-Tie Ninja
Aug 13, 2019
204
153
How problematic is SFX-L in the case? anyone have experience with them? might get the silverstone 1000w sfx-l to prep for next gen lol