• Hey Guest, save 20% on our entire merchandise range during the month of December! Use promo code MAKEITSMOL at Our Merchandise Store!
UPDATED..with Good News Everyone!

The original story was based on an earlier post from NCASE's site, but we have some very good news. While the M1 in it's current form has been discontinued, NCASE's founder has reached out and let us know that NCASE is far from dead, and a successor of sorts is in development. This is excellent news, and NCASE has updated their website to reflect it.

The original story is presented below so everyone can still see my tearful farewell.

_______________ Original Story Below______________

The legendary NCASE M1 has been discontinued.

There are some stories that hit in a personal way and this is one for me. I've followed the NCASE M1 since it's early days in the Hard OCP forums. I was an early backer, and have built more NCASE M1s than any other SFF case. If not for the NCASE M1, I would not have met the incredible people in this forum, and gotten this opportunity to write for SFF.Network. This is not an easy story to write, and I feel like the SFF world is suddenly a lot smaller (no pun intended).

NCASE announced that there will be no further orders for the M1 as of October 12, 2021. Along with this, there will be no more spare parts or accessories available for it. So what happened?

Well, the press release says it all: "evolving component requirements and shifts in the market have made it a less compelling option in recent times".

The NCASE M1 started design in 2012, back when all you needed was a I5-2500K to play games. Indeed, by the time I finally took my case out of storage to build it, the 6700K was the top tier CPU, and it only had 4 cores and 4 threads. However, today's top end systems have four times the cores, and can put out substantially more heat than was ever considered for the M1. Yet, the M1 persevered. The inclusion of an innovative side mount 240mm AIO allowed it to run any CPU that was thrown at it. It's the GPU where the NCASE M1 has had it's greatest challenge.

The M1 came at a time when GPUs were still only two slots, and often used blower style coolers. However, since the release of the Turing series of a GPUs, we've seen a move to 3 slot GPUs with axial fans that dump the heat back in the case. This is where I began to run into issues with my own M1. I was overclocking my 8086K to a 5GHz with a Founders Edition 2080 at over 2GHz. The heat from the GPU was astounding, and I actually burned myself once when I brushed up against the backplate. Maintaining the overclock on the CPU became almost impossible. Ultimately, I couldn't find a solution that worked without delidding the CPU; a step I didn't want to take. So I moved to a larger case. Ironically, I would ultimately return the 8086K back into the M1, but at stock clocks where the case performed fine.

(Image Credit: NCASE Website)

The M1 was an ever evolving case however. Version 6 of the M1 addressed many of the GPU cooling issues by revising the floor of the case, allowing for more airflow, and larger GPUs. It was peak M1 and was still the case that most other cases were judged against.

However, unlike 2012, the M1 faced competition now from not only dozens of other SFF community cases but also major manufactures that could simply produce their cases for far less money. Moreover, rip-off designs are now rampant from less-than-ethical manufactures that would sell their cases in foreign markets. It's just hard to convince someone on a budget that they should consider the M1 over cases such as the CoolerMaster NR200 for less than half the price when every other component is more expensive.

On top of all of that, add on all of this the supply issues and shortages driving up prices of raw materials and production, and you have a recipe for what we see here today. For those that don't know, Lian Li was contracted to produce the M1 throughout its life. They are battling their own supply issues which would no doubt delay and raise prices on smaller manufactures who contract through them.

It's the perfect storm.

There is some hope though. NCASE itself isn't dead. They have other products in design, but no timetable to bring them out. In the meantime, the spirit of the NCASE M1 lives on in our forums, and in such cases as the SSUPD Meshlicious and the Dan C4-SFX.

I was lucky enough to buy a spare NCASE M1 V6.1 last year. Now I will have to plan an extra special build for it. To everyone involved in the M1 project...from the forum users to the designers...I thank you for helping pioneer the SFF market. You have my eternal gratitude and appreciation.

For those that want to visit the origin of the NCASE M1, I invite you to follow this link to the original thread that started it all on Hard OCP.

Last edited:


Lord of the Boards
SFFn Staff
Gold Supporter
May 9, 2015
I was an OG backer as well, regretting giving it away to a family member and now even more. This case and the project itself was part of my life I will never forget. @Necere and @Wahaha360 thanks for all the memories, I'm hoping there's more to come !
  • Love
Reactions: Arboreal


SFF Guru
Original poster
Revenant Tech
SFFn Staff
Apr 21, 2017
I've had the opportunity to talk with Wahaha360 about the future of NCASE with some intriguing answers. While we haven't finished compiling the story about it, I can say that there will be developments in the future that members of the community will be excited about. As for the original M1 or now M1 Classic, when I asked about the possibilities of limited productions runs or it coming back I was told "never, say never" .


Cat-Dog Perch Manager
Bronze Supporter
May 18, 2020
Whew. That is a relief. I was worried given the glut of closings.


Cable-Tie Ninja
Jul 28, 2021
As a latecomer to the SFF party myself, I have always looked at the NCase M1 as one of the most iconic standards of what SFF computers can be and the boundaries that it has inspired to be pushed.

Even with the possibility of limited runs coming back, it is still sad to hear and see that the now deemed 'Classic' is going to be end of line.

And it also is exciting to see what new concepts and options will then explored in the future too!
  • Like
Reactions: Phuncz and Revenant


Shrink Ray Wielder
Jul 7, 2017
Back in 2016 I was using an Evolv ITX and decided I needed to either just get a mid tower or a real SFF case, and I ordered a M1. The Dan A4 was still in Kickstarter and the M1 was the only premium boutique case available. I used my v5.0 M1 for over 3 years and it went through several changes from full watercooing to big air to a 4x3.5 hdd server build. I eventually retired the case and sold it because I wanted someone else to enjoy it, still kicking myself for selling the case. One of the best things about the case was it's versatility.
  • Like
Reactions: Phuncz and Revenant


SFF Guru
Original poster
Revenant Tech
SFFn Staff
Apr 21, 2017
Versatility was an incredible strong point for the case. It was designed to the mm, but it could do everything. The single design issue I would have changed would have been some sort of too mounted exhaust to pull more hot air out. Between the rear exhaust and a too mounted 120mm, I think a lot of cooking issues would have been solved.
  • Like
Reactions: Phuncz and rfarmer