Reply to thread

Message

Hi, I recently got my Dan A4 SFX and I have a couple questions related to building it and would be
very grateful if some one here could answer them for me.
Parts List : https://pcpartpicker.com/user/jiroda/saved/#view=mxsLkL

I am using a Asetek 545 LC for AIO cooling the CPU

1. The power switch cable (2 PIN ) on the DAN A4 Sfx is very small for me to connect all the way to the ports on my mother board Asus ROG STRIX Z390 - I .From reading the manual , I think the port is located below the PCIE slot and above the NVME SSD but iam not sure exactly which ones, can some one help me identifying these ?. What would be the solution for increasing the length of the power cable on the DAN case ? Do I need to get an extension wire? If so can you provide me a link ?

2. I have the corsair SF 600 platinum which came with braided cables and I spent close to 3 hours to arrange them such that they dont block the fans but I am unsuccessful, can some one point me to a build with detailed instructions and pics ? Should get some custom sleeved cables of shorter lengths from cablemod or mode-one ? I also need the lengths for these cables if any one has already tried custom sleeving.

Cheers,
Jiroda

<blockquote data-quote="jiroda" data-source="post: 130410" data-attributes="member: 10563">Hi, I recently got my Dan A4 SFX and I have a couple questions related to building it and would be very grateful if some one here could answer them for me.Parts List : <a href="https://pcpartpicker.com/user/jiroda/saved/#view=mxsLkL">https://pcpartpicker.com/user/jiroda/saved/#view=mxsLkL</a>I am using a Asetek 545 LC for AIO cooling the CPU 1. The power switch cable (2 PIN ) on the DAN A4 Sfx is very small for me to connect all the way to the ports on my mother board Asus ROG STRIX Z390 - I .From reading the manual , I think the port is located below the PCIE slot and above the NVME SSD but iam not sure exactly which ones, can some one help me identifying these ?. What would be the&nbsp; solution for increasing the length of the power cable on the DAN case ? Do I need to get an extension wire?&nbsp; If so can you provide me a link ? 2. I have the corsair SF 600 platinum which came with braided cables and I spent close to 3 hours to arrange them such that they dont block the fans but I am unsuccessful, can some one point me to a build with detailed instructions and pics ? Should get some custom sleeved cables of shorter lengths from cablemod or mode-one ? I also need the lengths for these cables if any one has already tried custom sleeving.Cheers,Jiroda</blockquote>

[QUOTE="jiroda, post: 130410, member: 10563"] Hi, I recently got my Dan A4 SFX and I have a couple questions related to building it and would be very grateful if some one here could answer them for me. Parts List : [URL]https://pcpartpicker.com/user/jiroda/saved/#view=mxsLkL[/URL] I am using a Asetek 545 LC for AIO cooling the CPU 1. The power switch cable (2 PIN ) on the DAN A4 Sfx is very small for me to connect all the way to the ports on my mother board Asus ROG STRIX Z390 - I .From reading the manual , I think the port is located below the PCIE slot and above the NVME SSD but iam not sure exactly which ones, can some one help me identifying these ?. What would be the solution for increasing the length of the power cable on the DAN case ? Do I need to get an extension wire? If so can you provide me a link ? 2. I have the corsair SF 600 platinum which came with braided cables and I spent close to 3 hours to arrange them such that they dont block the fans but I am unsuccessful, can some one point me to a build with detailed instructions and pics ? Should get some custom sleeved cables of shorter lengths from cablemod or mode-one ? I also need the lengths for these cables if any one has already tried custom sleeving. Cheers, Jiroda [/QUOTE]

Verification